Skip to content

StateDMI / Command / SetDiversionStationDelayTablesFromRTN

Overview

The SetDiversionStationDelayTablesFromRTN command (for StateMod) command sets delay table data in existing diversion stations using information in an RTN format file, which is a format that has been used in CDSS StateMod modeling, and is created by the “makertn” program.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

SetDiversionStationDelayTablesFromRTN

SetDiversionStationDelayTablesFromRTN Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

SetDiversionStationDelayTablesFromRTN(Parameter="Value",...)

Command Parameters

Parameter             Description Default          
InputFile
required		 The name of the RTN file to process. Specify an absolute path or a path relative to the working directory. None – must be specified.
SetEfficiency
required		 Indicates whether the default efficiency value in the file should be used. None – must be specified.
IfNotFound Used for error handling, one of the following:
  • Fail – generate a failure message if the ID is not matched
  • Ignore – ignore (don’t add and don’t generate a message) if the ID is not matched
  • Warn – generate a warning message if the ID is not matched
    		 Warn

    Examples

    See the automated tests.

    A sample RTN file is shown below:

    200511         2             75            1
              200742         1             1
              200742         99            2
200742         2             75            1
              200787         1             1
              200787         99            2
200752         2             75            1
              20ADW07        1             1
              20ADW07        99            2

    The first line contains the station identifier, number of return flow locations, default efficiency for the station, and the default delay table to use for the return. For the number of return flow locations, the following lines indicate the identifier for the station to receive the return, the percentage of the return to receive, and the delay table for the return.

    Troubleshooting

    See Also