Skip to content

StateDMI / Command / FillClimateStationsFromHydroBase

Overview

The FillClimateStationsFromHydroBase command (for StateCU) fills missing data in existing climate stations, using HydroBase for data.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

FillClimateStationsFromHydroBase

FillClimateStationsFromHydroBase Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

FillClimateStationsFromHydroBase(Parameter="Value",...)

Command Parameters

Parameter             Description Default          
ID A single climate station identifier to match or a pattern using wildcards (e.g., 20*). None – must be specified.
IfNotFound Used for error handling, one of the following:
  • Fail – generate a failure message if the climate station is not found
  • Ignore – ignore (don’t generate a message) if the climate station is not found
  • Warn – generate a warning message if the climate station is not found
 Warn

Examples

See the automated tests.

The following example command file illustrates how climate stations can be defined, filled from HydroBase, and written to a StateCU file:

ReadClimateStationsFromList(ListFile="climsta.lst",IDCol=1)
FillClimateStationsFromHydroBase(ID="*")
SetClimateStation(ID="3016",Region2="14080106",IfNotFound=Warn)
SetClimateStation(ID="1018",Region2="14040106",IfNotFound=Warn)
SetClimateStation(ID="1928",Elevation=6440,IfNotFound=Warn)
SetClimateStation(ID="0484",Region1="MOFFAT",IfNotFound=Add)
WriteClimateStationsToStateCU(OutputFile="COclim2006.cli")

Troubleshooting

See Also