StateDMI / Command / WriteReservoirStationsToList

Overview
Command Editor
Command Syntax
Examples
Troubleshooting
See Also

Overview

The WriteReservoirStationsToList command (for StateMod) writes reservoir stations data to a delimited file. In addition to the main station file, files with suffixes _Collections, _Accounts, _ContentAreaSeepage, _EvapStations, and _PrecipStations are written, containing secondary station information.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

WriteReservoirStationsToList Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

WriteReservoirStationsToList(Parameter="Value",...)

Command Parameters

Parameter	Description	Default
`OutputFile` required	The name of the output file to write, surrounded by double quotes.	None – must be specified.
`WriteHow`	`OverwriteFile` if the file should be overwritten or `UpdateFile` if the file should be updated, resulting in the previous header being carried forward.	`OverwriteFile`
`Delimiter`	The delimiter character to use between columns.	`,` (comma)

Examples

See the automated tests.

The following example illustrates how to create a list of diversion stations from a network file:

ReadReservoirStationsFromNetwork(InputFile="rg2007.net")
WriteReservoirStationsToList(OutputFile="rg2007.csv")

Troubleshooting

See the main troubleshooting documentation