StateDMI / Command / WritePenmanMonteithToList

Overview

The WritePenmanMonteithToList command (for StateCU) writes Penman-Monteith crop coefficients data to a delimited file.

The following dialog is used to edit the command and illustrates the command syntax.

WritePenmanMonteithToList Command Editor (see also the full-size image)

The command syntax is as follows:

WritePenmanMonteithToList(Parameter="Value",...)

Command Parameters

Parameter	Description	Default
`OutputFile` required	The name of the output file to write.	None – must be specified.
`WriteHow`	`OverwriteFile` if the file should be overwritten or `UpdateFile` if the file should be updated, resulting in the previous header being carried forward.	`OverwriteFile`
`Delimiter`	The delimiter character to use between columns.	`,` (comma)

The following example illustrates how to process crop characteristics data from HydroBase:

ReadPenmanMonteithFromHydroBase(PenmanMonteithMethod="PENMAN-MONTEITH_ALFALFA")
WritePenmanMonteithToList(OutputFile="test.csv")