TSTool / Command / FillDayTSFrom2MonthTSAnd1DayTS

Overview
Command Editor
Command Syntax
Examples
Troubleshooting
See Also

Overview

The FillDayTSFrom2MonthTSAnd1DayTS command fills a daily time series using the following relationship:

D1i = D2i*(M1i/M2i)

where:

i = day D1 is the daily data at location 1 M1 is the monthly data at location 1 (for the month corresponding to the day) D2 is the daily data at location 2 M2 is the monthly data at location 2 (for the month corresponding to the day)

This fill method assumes the monthly time series are filled and reasonably correlated and that the daily pattern D2 can be applied at D1. For example, use this command to fill daily streamflow where filled monthly data are available at nearby locations and filled daily data is available at the independent (D2) station.

Command Editor

The command is available in the following TSTool menu:

Commands / Fill Time Series Missing Data

The following dialog is used to edit the command and illustrates the syntax of the command. For all the time series identifiers, the last matching identifier before the command will be matched for processing. Currently there is no way to fill multiple time series with one command.

FillDayTSFrom2MonthTSAnd1DayTS Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

FillDayTSFrom2MonthTSAnd1DayTS(Parameter="Value",...)

Command Parameters

Parameter	Description	Default
`TSID_D1`	The time series identifier or alias for the daily time series to be filled.	None – must be specified.
`TSID_M1`	The time series identifier or alias for the monthly time series, corresponding to `TSID_D1`, to supply the monthly values to be distributed to daily.	None – must be specified.
`TSID_M2`	The time series identifier or alias for the independent monthly time series.	None – must be specified.
`TSID_D2`	The time series identifier or alias for the independent daily time series, corresponding to `TSID_M2`.	None – must be specified.
`FillStart`	Date/time indicating the start of filling, using a precision appropriate for the time series, or `OutputStart`.	Fill the entire time series.
`FillEnd`	Date/time indicating the end of filling, using a precision appropriate for the time series, or `OutputEnd`.	Fill the entire time series.

Examples

See the automated tests.

A sample command file to process a time series from the State of Colorado’s HydroBase database is as follows.

# The following is D1:
# (1995-1998) ALAMOSA RIVER ABOVE JASPER, CO  USGS  Streamflow  Daily
08235350.USGS.Streamflow.Day~HydroBase
# The following is M1:
# (1995-1998) ALAMOSA RIVER ABOVE JASPER, CO  USGS  Streamflow  Monthly
08235350.USGS.Streamflow.Month~HydroBase
# The following is D2:
# (1914-1998) ALAMOSA RIVER ABOVE TERRACE RESERVOIR, CO.  DWR  Streamflow  Daily
08236000.DWR.Streamflow.Day~HydroBase
# The following is M2:
# (1914-1998) ALAMOSA RIVER ABOVE TERRACE RESERVOIR, CO.  DWR  Streamflow  Monthly
08236000.DWR.Streamflow.Month~HydroBase
FillRegression(TSID="08235350.USGS.Streamflow.Month",IndependentTSID="08236000.DWR.Streamflow.Month",NumberOfEquations=OneEquation,Transformation=Linear)
FillDayTSFrom2MonthTSAnd1DayTS(TSID_D1="08235350.USGS.Streamflow.Day",TSID_M1="08235350.USGS.Streamflow.Month",TSID_M2="08236000.DWR.Streamflow.Month",TSID_D2="08236000.DWR.Streamflow.Day")

The following graph shows the two daily time series used in the command (zoomed in). Note that the shape of the filled time series is similar to the other time series.

Graph example of Filled Data

Example of Filled Data (see also the full-size image)

Troubleshooting

See the main TSTool Troubleshooting documentation.