Skip to content

TSTool / Release Notes / Version 14

Release notes for specific versions are listed below. See also the GitHub repository issues for outstanding issues and enhancement requests. Issues may also be included in other repositories that are TSTool components.

Changes in Version 14.8.3

Maintenance release to enable raster graphs for hour and minute interval time series.

  • change [14.8.3] Update the ProcessRasterGraph command:
    • Enable 1-hour and N-minute interval time series.
    • Improve tick mark rendering for raster graphs.

Changes in Version 14.8.2

Maintenance release to fix raster graphs when no time series data.

  • bug [14.8.2] Update the ProcessRasterGraph command:
    • Handle case where a time series is completely missing or has no data. This allows the raster graph to be used on large datasets that may have missing data.
    • Improve error handling when reading the symbol table file for raster graphs.

Changes in Version 14.8.1

Maintenance release to support the new Zabbix plugin.

  • bug [14.8.1] Update the WebGet command to improve handling of the payload, including allowing a payload for the GET HTTP method.
  • change [14.8.1] TSTool has been tested with the new Zabbix web services plugin. See the Plugins Reference.

Changes in Version 14.8.0

Feature release to improve dataset publishing and visualization. Remove the requirement for administrator privileges to install on Windows.

  • bug [14.8.0] Update the time series table view to copy to the clipboard for irregular interval time series.
  • change [14.8.0] Remove the requirement for administrator privileges to install on Windows.
  • change [14.8.0] Enhance the Delta command to improve handling of rollover:
    • Add the CopyDataFlags, AutoRestFlag, RolloverFlag, and ManualResetFlag parameters to allow setting flags to check the output.
    • Add the RolloverDeltaLimit parameter to control whether a rollover should be handled as a manual rese.
  • change [14.8.0] Enhance the DeleteTableRows command:
    • Add First and Last parameters to simplify deleting table rows at the start and end of a table.
    • Add DeleteCountProperty and RowCountProperty parameters to allow checking that the delete happened as expected
  • change [14.8.0] Enhance the ListFiles command:
    • Update to list folders in addition to files as controlled by the ListFiles and ListFolders parameters.
    • Add the ListScope parameter to allow listing files in the specified folder or also all subfolders.
    • Add additional information to the output table including type as File or Folder, Size, Owner, ParentFolder, LastModified time.
    • Change the output table column FileName to Name to handle files and folders.
    • Change the IncludeFiles parameter to IncludeNames to handle files and folders.
    • Change the ExcludeFiles parameter to ExcludeNames to handle files and folders.
    • The command parameter defaults match previous functionality.
  • change [14.8.0] Enhance the NewStatisticYearTS command:
    • Add the YearStartTime and YearEndTime parameters to control how midnight is interpreted when determining the sample data. These parameters only apply when the input time series has data interval with time (less than a day).
    • Change the default behavior when handling input time series with time in the interval so that YearStartTime=AfterMidnight and YearEndTime=Midnight, which is consistent with the TSTool convention that the date/time matches the interval end. Previously midnight was not included as the year-ending time.
    • The TestValue parameter has been removed and Value should be used instead. The command will automatically convert TestValue to Value1. This transition should not impact recent workflows because Value1 has been the default for a while.
    • The AllowMissingCount parameter is not checked for irregular interval input time series because irregular interval data often do not store missing values.
    • New OutputYearType parameter values support all 12-month variations in a general way, similar to old WaterYear.
  • change [14.8.0] Enhance the ProcessRasterGraph command:
    • If a single time series is processed, the time series interval must be day or month and the graph will have dates on both axes (this is the same functionality as before).
    • If multiple time series are processed, the time series must have consistent time intervals and any regular interval can be processed. Each time series is listed on the y-axis and the time period is displayed on the x-axis. The period must be short enough that each interval can be displayed as a "pixel" of color. The x-axis can be zoomed to show more detail.
    • The Results / Graph - Raster Graph view has been updated to behave similarly.
  • change [14.8.0] Enhance the ReadPropertiesFromFile command:
    • Add support for the INI file format.
    • Change the IncludeProperty parameter to IncludeProperties (plural) to reflect command functionality. The old parameter name is automatically changed to the new name.
    • Add the ExcludeProperties parameter to control which properties are read.
    • Add the IgnoreCase parameter to control whether property names are compared by considering or ignoring case.
    • Add the ExpandProperties parameter to control whether file properties are expanded if ${Property} notation is found in property values.
    • Add support for PARENT_FOLDER and PARENT_PARENT_FOLDER property values.

Changes in Version 14.7.0

Feature release to improve the experience for new TSTool users.

  • change [14.7.0] The Datastore tab in the Input/Query Options area of the main TSTool window is now selected by default. The Input Type tab can be selected if necessary. The use of web service datastores and plugin datastores is increasing and therefore the Datastore tab is the new default.
  • change [14.7.0] TSTool is configured by default to show the Select HydroBase dialog at startup. HydroBase is enabled by default because of TSTool's use by the State of Colorado. Most users do not install a local version of HydroBase and therefore the dialog is not relevant, shows no HydroBase databases, and slows startup because TSTool searches for HydroBase databases. Using the Cancel button on the HydroBase selection dialog now shows an additional dialog explaining how to disable HydroBase.
  • change [14.7.0] Update the command reference documentation to indicates the menu in which a command editor is found.
  • change [14.7.0] Update the documentation for web accessibility compliance and site review checks:
    • Links are now shown as underlined.
    • Images use human-readable "alt text".
    • The Troubleshooting documentation for each command now links to the main TSTool troubleshooting.
  • change [14.7.0] TSTool has been tested with the new Synoptic data web services plugin. See the Plugins Reference.
  • bug [14.7.0] Many commands that include TableID and similar parameters provide a drop-down choice in the command editor to select a table. These parameters can often be specified with ${Property} syntax by typing into the form, to allow for flexibility in workflows and because it may be difficult to provide an accurate list of tables from previous commands. Previously, typing into the editor field did not update the commmand shown at the bottom of the editor. This has been fixed.
  • bug [14.7.0] Fix the NewPatternTimeSeries command editor to enable the IrregularInterval parameter when the NewTSID use ${Property} and any occurrence of IRR, ignoring case.
  • bug [14.7.0] Fix a minor bug in ReadTimeSeriesList where the ReadData parameter was not being handled in the command editor.
  • change [14.7.0] The Delta command has been enhanced:
    • The ResetType parameter indicate the reset type for cumulative time series.
    • The ResetType=Auto parameter automatically handles data with resets.
    • The ResetType=Rollever parameter handles data with rollover at a maximum value.
    • Additional checks have been implemented to help with review of data such as cumulative precipitation.
    • Data problems that are detected can be output to a table to help with data quality control.
  • new [14.7.0] The SetPropertyFromDataStore command has been added to set a processor property from a datastore configuration property.

Changes in Version 14.6.0

Feature release to implement command indentation.

  • bug [14.6.0] Fix the ReadColoradoHydroBaseRest command:
    • Several Where filters, when selected, did not update the command parameters, including county, latitude, and longitude.
  • new [14.6.0] Add command indentation:
    • Added the Indent Right and Indent Left popup menu choices to indent and unindent commands that are selected in the Commands area. Select one or more commands and then right-click to use the popup menu to change indentation.
    • The default indentation is 4 spaces.
    • All commands have been updated to enable indentation.
    • Commands are automatically indented based on the previous commands' indentation and whether the inserted command follows an If or For command.
    • TSTool plugins must be updated to newer versions to utilize indentation (refer to the release notes for the plugins).
  • change [14.6.0] Update all command parameters to use double quotes.
    • This provides consistency for all commands.
    • Previously, parameters that did not need to be quoted such as numbers were not quoted.
    • The new convention also ensures that parameter values that use ${Property} are handled for complex syntax.
  • change [14.6.0] Editor dialogs that use Where parameters and input filters have been updated so that typing characters into text fields immediately updates the command shown in the bottom of command editors.
  • change [14.6.0] The graph warning about incompatible units will now display on the TSTool window when multiple computer displays are used so the warning is more obvious.

Changes in Version 14.5.4

Maintenance release to improve plugin integration and automated testing.

  • bug [14.5.4] Fix bugs in the TSID command:
    • Adding a new TSID command now shows the editor whereas previously the generic command editor was shown.
    • The TSID editor now properly shows single quotes in TSIDs (previously they were not displayed even when present in the command).
    • TSID strings where a part included single-quoted subparts were not being parsed correctly. For example, a data type 'part1'-'part2' was not being parsed correctly. This has been fixed.
  • bug [14.5.4] Fix the Command Status window to center on the screen where the TSTool main window is visible, rather than the first screen in multi-screen workstations.
  • change [14.5.4] Increase the speed of parsing command strings when reading, editing, and running command files.
  • change [14.5.4] Convert startup messages to debug messages to reduce information in the log file. Debug can be turned on with the -d command line parameter if necessary to view the messages.
  • change [14.5.4] Command editor dialogs for editing parameters that are maps (key:value,key:value,...) and delimited lists (value1,value2,...) have been updated to provide more functionality including inserting and removing rows. These editors will be phased into more command editors.
  • change [14.5.4] The CompareFiles command has been updated:
    • The CommentLineChar property now allows <!-- for HTML comments.
  • change [14.5.4] The SetPropertyFromTable command has been updated:
    • The RowCountProperty and ColumnCountProperty parameters have been added to allow setting processor properties for the table size, which is useful for automated testing and workflow checks.
  • new [14.5.4] The RemoveFolder command has been added to remove a folder.

Changes in Version 14.5.3

Maintenance release to improve plugin integration.

  • change [14.5.3] Update the time series properties view to show the time series identifier parts in separate text fields. This facilitates troubleshooting.
  • change [14.5.3] Time series library code has been updated to improve plugin integration. The changes allow better error handling when reading time series. Existing plugins that read time series will not work with this version of TSTool and will need to be recompiled.

Changes in Version 14.5.2

Maintenance release to improve JSON object features, and fix HydroBase web service issue.

  • bug [14.5.2] Fix the Colorado HydroBase REST web service datastore:
    • Fix issue where telemetry station time series could not be copied from the time series list to the command area.
  • remove [14.5.2] Remove the unused legacy State of Colorado Satellite Monitoring System library from development files. The latest HydroBase web services have replaced this old library.
  • change [14.5.2] Update the copyright notice for 2023.
  • change [14.5.2] Update the NewObject and WriteObjectToJSON commands and the main interface to support JSON files that have [ ] array at the top level.
  • new [14.5.2] TSTool has been tested with the Kisters WISKI (KiWIS) plugin.

Changes in Version 14.5.1

Maintenance release to improve cloud integration, JSON object features, and HydroBase web service diversion record handling.

  • bug [14.5.1] Fix the Colorado HydroBase REST web service datastore handling of diversion records:
    • Previously, some monthly values were read as missing values, with results being different than time series read from a HydroBase database, which contained zeroes instead of missing. This has been fixed, as described below.
    • Monthly diversion records from web services now reflect application of the carry forward fill algorithm. Missing months where the previous month's last daily record was a zero are set to zero and carried forward in the irrigation year. The results should match monthly records red from HydroBase. Implementing this logic requires reading the daily time series so retrieving monthly data is slower than before.
    • The period for time series is internally set to full irrigation years to support the carry forward algorithm. After filling, the period is set to the requested period, if provided by read commands.
    • The carry forward fill logic is the default for web service diversion record time series identifiers and the ReadColoradoHydroBaseRest command.
  • change [14.5.1] Update the ReadHydroBase command:
    • The period for time series is internally set to full irrigation years to support the carry forward algorithm. After filling, the period is set to the requested period, if provided by read commands.
    • Fix so that if filling with diversion comments and the fill flag is defaulted, it sets the flag in the result. Previously it was not setting the flag in output if for default parameters.
  • bug [14.5.1] Fix the Colorado HydroBase REST web service datastore query filters:
    • Climate stations can now be filtered by station name and site identifier.
    • Surface water stations can now be filtered by station abbreviation.
  • change [14.5.1] The processor property UserHomeDir has been changed to have the value of the home directory. Previously it ended in \.tstool on Windows and /.tstool on Linux, which is not consistent with the user's home folder. The new property UserTstoolDir has been added to include the trailing .tstool.
  • change [14.5.1] The ReadTableFromJSON command has been updated:
    • Empty strings in the JSON that are used as input for non-string output result in null values.
    • Add the Append parameter to allow appending output to an existing table.
    • Add the ObjectID parameter to allow reading JSON from an object.
    • Add the RowCountProperty parameter to allow checking the size of the output table.
  • change [14.5.1] The WebGet command has been updated:
    • Add the Cookies parameter.
    • Add tabs to the command editor to group related parameters.
  • new [14.5.1] Add the SetPropertyFromObject command to set a processor property from an object property.

Changes in Version 14.5.0

Feature release to improve cloud and JSON object integration and various fixes.

  • bug [14.5.0] The Results / Objects output has been fixed to only show the object JSON. Previously the internal TSTool object was shown, which wraps the original object and adds The JSON object identifier used by TSTool.
  • change [14.5.0] The TSTool main user interface code has been made more modular to split out code for different data sources to improve maintainability. The class names shown in the log file may have changed.
  • change [14.5.0] The syntax for specifying a date/time, for example in the SetInputPeriod command now supports rounding to week using the following syntax, which is useful to automate weekly scheduled workflows: CurrentToDay.RoundToDayOfWeek(Wednesday).RoundDirection(>)
  • change [14.5.0] The ManipulateTableString command has been updated:
    • The substring operator now supports negative positions to extract substrings at the end of a string.
    • The substring operator will now extract partial strings if the starting position is within the string but the ending position is past the end of the string.
  • change [14.5.0] The WriteTableToMarkdown command has been updated:
    • Columns values that start with http are automatically formatted as links.
    • The LinkColumns command parameter has been added to specify the link text (default is to show the link URL).
  • new [14.5.0] Update the documentation organization:
    • Add a "Processing" chapter with pages for each group of commands that process various data. This provides background and help with training. Examples will be added over time. Previous content for spatial data and spreadsheet processing have been moved to sections of this chapter and the documentation may be further reorganized once initial documentation content is added.
    • Add the Reference - Plugins documentation to list known TSTool plugins.
  • new [14.5.0] Add features to track command file versions and improve attribution and documentation, which helps with command file maintenance and collaboration:
    • The # comment annotations now include @author, @version, @versionDate, @sourceUrl, and @docUrl.
    • The Tools / Commands menu has been added with tools to check for updates to the command file and allow comparison of the current commands to the original source.
  • new [14.5.0] The SetObjectProperty command has been added to set object property values.

Changes in Version 14.4.0

Feature release to improve cloud integration, fix HEC-DSS, add support for object data type, and various fixes.

  • new [14.4.0] The primary TSTool development environment is now Windows 11 using 64-bit Java 8.
  • new [14.4.0] Verify integration of the TSTool AWS Plugin from the Open Water Foundation in production workflows to publish datasets to the cloud.
  • new [14.4.0] Add general objects as a top-level data construct:
    • Add a new Commands / Object Processing menu.
    • Add a new Results / Objects tab for results.
  • new [14.4.0] Add new commands to process objects:
  • bug [14.4.0] Fix so that the TSTool.cfg DiffProgram property handles a comma-separated list to allow for multiple candidate difference programs to be specified, and handle in the main program and the CompareFiles command. The default configuration file has been updated to handle multiple KDiff3 installation folders.
  • bug [14.4.0] Fix the HEC-DSS features:
    • ReadHecDss and the WriteHecDss commands and interactive browsing had been broken since TSTool was updated to 64-bit architecture.
    • Update the ReadHecDss command to have CloseAfterRead parameter to help with file locking.
  • bug [14.4.0] Fix the CompareTables command to detect tables of different lengh (previously the number of rows in the first table controlled the comparison)
  • change [14.4.0] Update configuration and documentation to use https where possible.
  • change [14.4.0] The time series table view header now shows units in parentheses and minor formatting cleanup avoids headers ending in a comma.
  • change [14.4.0] Commands that provide a choice on time series interval now include precision on irregular time series (e.g., IrregSecond). This allows for better handling of date/time precision in workflows.
  • change [14.4.0] The Cumulate command has been updated:
    • The default value for the ResetValue parameter (used with Reset parameter) has been changed to DataValue. The previous value of 0 causes the first value in the new year to always be zero, even if a non-zero data value is present at that date/time, which causes a value to be ignored and the cumulative value to be shorted by the ignored value. This is more of an issue for monthly time series where 1 out of 12 values is ignored.
  • change [14.4.0] The If command has been updated:
    • Added the FileExists and FileDoesNotExist parameters to test whether a file exists.
    • Added the ObjectExists and ObjectDoesNotExist parameters to test whether an object exists.
    • Added the TableExists and TableDoesNotExist parameters to test whether a table exists.
    • Added the TSDoesNotExist parameter to test whether a table does not exist.
  • change [14.4.0] The ReadDelimitedFile command has been updated to list additional data interval for irregular time series. The intervals include the precision that should be used for date/times, for example IrregSecond.
  • change [14.4.0] The ReadPropertiesFromFile command has been updated:
    • Added the Value file type, to allow reading a file's contents into a property, which is useful when manipulating text files, such as with the TextEdit command.
  • change [14.4.0] Update the WriteDelimitedFile command to have the DataFlagColumns parameter to optionally output data flag column(s)

Changes in Version 14.3.0

Feature release to improve automated testing, cloud integration, and reenable Microsoft Access support.

  • new [14.3.0] The Comment command has been updated:
    • Added @enabledif annotation similar to @require that disables a command file test for automated testing when a requirement is not met.
    • Fixed bug where @require was not being properly handled when checking the HydroBase version, when run in a test suite.
  • bug [14.3.0] Fix the ColoradoHydroBaseRest datastore:
    • Null date/time objects, for example in the porStart and porEnd for data types were causing the HydroBaseWeb datastore to not initialize when TSTool starts. This may be due to changes in how the State publishes data.
    • Null date/times are now passed through as nulls, which may cause problems later in processing.
  • bug [14.3.0] Fix to support Microsoft Access databases again for GenericDatabaseDatastore:
    • Direct use of ODBC data source names was dropped in Java 8 (TSTool 12).
    • Implement the UcanAccess software with pure Java JDBC connection to Access instead.
    • Add Access support in the OpenDataStore command and add the ConnectionProperties command parameter to allow additional connection priperties.
    • Add the NewAccessDatabase command.
  • bug [14.3.0] Fix the ProcessTSProduct command to parse time series product file colors that use format #ffffff.
  • bug [14.3.0] Fix the ReadTableFromDelimitedFile command to determine floating point number column precision even if the values are quoted. The DoubleColumns command parameter allow such values to be read as numbers, and precision is used for displays after reading.
  • bug [14.3.0] Fix the WebGet command:
    • Handle URL with query values that have equal sign in the parameter value.
    • Improve handling of supported HTTP methods.
  • bug [14.3.0] Fix the WriteTableToGeoJSON command editor so that the Append parameter field does not overwrite other fields.
  • change [14.3.0] Add built-in processor properties:
    • RunTimeMs - number of milliseconds for commands to run. This is useful for performance evaluation.
    • WarningCount - number of warning messages from commands in the last run. This is useful for workflow success checks.
    • FailureCount - number of failure messages from commands in the last run. This is useful for workflow success checks.
  • change [14.3.0] Update the CompareFiles command:
    • Allow the input file(s) to be specified with a URL, to compare web-hosted file(s).
    • Add the WaitUntil and related parameters to allow repeated comparison of files until the condition of same or different files is met.
  • change [14.3.0] Update the ReadDateValue command:
    • Add the IfNotFound parameter to ignore reading if the file does not exist, which is useful for reading files during troubleshooting.
  • change [14.3.0] Update the ReadNrcsAwdb command:
    • Allow ${Property} in state.
    • Increase speed at startup when using properties.
  • change [14.3.0] Update the RunCommands command:
    • Handle @enabledif annotations.
    • Add the AppendOutputFiles parameter to append the command's output files to the main output file list.
    • Add the WarningCountProperty and FailureCountProperty parameters to allow handling errors in the command file that is run.
  • change [14.3.0] Update the TableMath command:
    • Add Max and Min operators.
    • Change so that the precision of floating point output columns is the maximum of the input columns.
  • change [14.3.0] Update the WriteDateValue command:
    • The WriteDataFlags parameter has been added to control whether data flags are written.
    • The WriteSeparateFiles parameter has been added to control whether one or separate output files for each time series are written.
    • The WriteHeaderComments and HeaderComments parameters have been added to control how output file header comments are written.
  • change [14.3.0] Update the WriteDelimitedFile command:
    • The WriteSeparateFiles parameter has been added to control whether one or separate output files for each time series are written.
    • The WriteHeaderComments and HeaderComments parameters have been added to control how output file header comments are written.

Changes in Version 14.2.2

Maintenance release to address issues found in the HydroBase REST web services datastore.

  • bug [14.2.2] Fix issues identified while implementing the ColoradoHydroBaseRest datastore:
    • Tested with HydroBase 20200330 version.
    • Fixed issue where HydroBase database SnowDepth data type was returning -2147483648 for missing values because the database changed from integer to floating number type.
  • bug [14.2.2] Fix bug where View / Data Units resulted in an error.

Changes in Version 14.2.1

Maintenance release to disable real-time data in HydroBase database datastore, other cleanup for recent releases.

  • remove [14.2.1] Remove real-time data in HydroBase datastore and input type since no longer supported in the current HydroBase approach and data are available in the ColoradoHydroBaseRest datastore. The Irregular interval (timestep) has been removed from the following data types, and the data type has also been removed if real-time interval was the only choice:
    • AdminFlow - AdminFlow (Day and Month remain)
    • Hardware - Battery (real-time only)
    • Climate - Precip (Day and Month remain)
    • Climate - Temp (has real-time only)
    • Reservoir - PoolElev (has real-time only)
    • Reservoir - Release (has real-time only)
    • Reservoir - Stage (has real-time only)
    • Reservoir - Storage (has real-time only)
    • Stream - WatTemp (has real-time only)
    • Well - WellLevel (has multiple intervals but have been phasing out for years so remove)
    • Well - WellLevelElev (has real-time only)
  • bug [14.2.1] Fix the graphing tool to show mouse tracker when irregular time series do not have fully-overlapping periods. Also add the tracker option NearestWithId to show the time series identifier on the tracker, which is useful when many time series are shown.
  • bug [14.2.1] Fix bug where sub-second precision dates were truncating when read if the fractional digits did not match a handled interval. For example, 4 digits would truncate to milliseconds. The software will now use the next highest precision if the number of digits being parsed is not an exact match for hundredths, milli, micro, or nanoseconds, and additional zeros will be added at the end.
  • bug [14.2.1] Fix the Cumulate command so an error is not shown for the Reset parameter if not specified (the parameter is optional).
  • change [14.2.1] Update the WebGet command to have HttpHeaders parameter to pass HTTP header properties with the request.

Changes in Version 14.2.0

Feature release to add HydroBase REST web services for historical climate and surface water stations, and add support for sub-second time.

  • new [14.2.0] The ColoradoHydroBaseRest web service has new functionality:
    • Historical climate station time series can now be read.
    • Historical surface water station time series (streamflow) can now be read.
    • The ReadColoradoHydroBaseRest command has been updated to read the above historical time series.
    • Time series identifier commands for the datastore read the above historical time series.
    • The datastore documentation has been significantly updated.
  • bug [14.2.0] The Agriculture/NASS CropArea data type was listed for HydroBase; however, time series that were listed could not be transferred to the command list. This has been fixed.
  • remove [14.2.0] Code for DIADvisor input type has been removed. The software features had not been used for many years and were unsupported.
  • change [14.2.0] Internal date/time objects have been updated to support sub-second precision, as follows:
    • Nanonsecond, microsecond, millisend, and hundredths of second fractional seconds are supported and are handled automatically during date/time parsing and formatting. Previously only hundredths of seconds was supported.
    • Begin phasing in precision for irregular time series time interval. For example IrregSecond is used for irregular time series with date/times that use precision to second. High precision time is handled, for example to track exact measurement times for real-time data values.
    • Several commands listed below have been updated to utilize the new functionality and additional features will be updated over time.
  • change [14.2.0] Time series now have a built-in data precision property that is used for output if specified, which will override the precision determined from data units. Use the Results / Time Series Properties menu to view a time series' precision.
  • change [14.2.0] Update the CreateTimeSeriesEventTable command to support analysis of time series data to determine events.
  • change [14.2.0] Update the FormatTableDateTime command to allow incremental time offset to use floating-point number with fractional intervals. For example, fractional minutes can be processed.
  • change [14.2.0] Update the TableToTimeSeries command to support sub-second precision for irregular interval time series. The IrregularIntervalPrecision now accepts HSecond, Millisecond, Microsecond, and Nanosecond.

Changes in Version 14.1.1

Maintenance release to fix features used in automated testing.

  • bug [14.1.1] Handling of the --datastore-substitute behavior was not consistent across multiple testing environments. Fixes were implemented and documentation was updated. Fix the View / Datastores table to more clearly indicate when a datastore is involved in a substitute.

Changes in Version 14.1.0

Feature release to format table as Markdown and improve file handling.

  • new [14.1.0] Add the SetTableColumnProperties command to set table column properties, used when formatting output.
  • new [14.1.0] Add the WriteTableToMarkdown command to write a table to a Markdown format file.
  • change [14.1.0] Update the AppendFile command:
    • The output file can be the same as an input file (input file will be overwritten).
    • Input files can now be specified as a comma-separated-value list of filenames or patterns.
    • Filename pattern handling has been enhanced.
    • The AppendText parameter has been added to append text to a file.
    • Increase flexibility of wildcard (glob) pattern matching.
  • change [14.1.0] Update the StartRegressionTestResultsReport command to output a report with nonum in the name. The file is the same as the normal output but with test numbers removed, which is useful for comparing one test suite output to another.
  • change [14.1.0] Update the Cumulate command Reset parameter to allow ${Property} notation.
  • change [14.1.0] Update the FormatFile command to allow overwriting the input file.

Changes in Version 14.0.6

Maintenance release for to improve @require functionality.

  • change [14.0.6] Updated the @require Comment command:
    • Improve the @require software design to allow datastores more flexibility in implementing requirements.
    • Add the datastore type to @require command status messages to improve troubleshooting.

Changes in Version 14.0.5

Maintenance release for testing and to update the log4j library.

  • bug [14.0.5] Update the Log4J library to version 2.17.1 for security patches.
  • change [14.0.5] Updated the FormatStringProperty command:
    • Add the IntegerFormat, Endianness, Delimiter, and NumBytes parameters to format integer properties as hex code string, which is useful for automated testing.

Changes in Version 14.0.4

Maintenance release to update training materials and respond to "Log4Shell" vulnerability.

  • bug [14.0.4] Update the log4j library to version 2.17.0 in response to the "Log4Shell" security vulnerability. See the Apache Log4J Vulnerability Guidance documentation.
  • bug [14.0.4] Fix a bug introduced in the previous release that broke transfer of time series identifiers from the time series list to TSID commands. This bug was due to new features that handle datastore aliases used in software testing. The bug mainly impacts the case where the HydroBase input type is used with TSID commands. If version 14.0.3 is used, the work-around is to configure a HydroBase datastore named HydroBase.
  • change [14.0.4] Training materials that are distributed in the doc/training folder have been updated to be compatible with the latest software features. Additional training presentations will be added in the future as training materials are updated. The Training documentation now links to online training materials.
  • change [14.0.4] Updated the WebGet command to handle redirects.

Changes in Version 14.0.3

Maintenance release for Reclamation Linux version.

  • change [14.0.3] Updated the CompareTimeSeries command to have AllowedDiff parameter
  • change [14.0.3] Minor changes to ReclamationHDB commands based on testing.

Changes in Version 14.0.2

Maintenance release with changes to address issues and features needed for automated testing.

  • bug [14.0.2] Fix bug related to substitute datastore features:
  • bug [14.0.2] Fix the TableToTimeSeries command so that irregular interval data outside the requested period are not set in the time series.
  • change [14.0.2] Change the ReadTableFromDelimitedFile command IncludeText and ExcludeText parameters to automatically convert * wildcard to Java .* to simplify wildcard use and be consistent with other commands.
  • change [14.0.2] Update the ReadTableFromDelimitedFile command:
    • allow * in the filename
    • fix the HeaderLines parameter to work
  • change [14.0.2] Update commands to improve handling database functions and procedures:
  • new [14.0.2] Add --ui-titlemod=TitleMod TSTool program parameter to specify a string to use in the TSTool main UI title bar, to specifically identify the TSTool session .

Changes in Version 14.0.1

Maintenance release with minor changes to address issues and features needed for automated testing.

  • bug [14.0.1] Fix command processing so that if a command has an error, the command's output files will be listed in the Results / Output Files. Previously, a command with an error would not list its output files.
  • bug [14.0.1] Fix problem with command documentation not finding latest documentation if versioned documentation does not exist and update documentation URLs to https.
  • bug [14.0.1] Fix the CompareTimeSeries command to properly handle comparing two files or ensembles.
  • bug [14.0.1] Fix bug where command with #@expectedStatus comment that, when run returned a different status, was not resulting in a failure indication in the user interface.
  • change [14.0.1] Add a Cancel button to the Tools / Diagnostics dialog and clarify the tooltips on buttons related to setting diagnostics properties.
  • change [14.0.1] Add TSTool.cfg configuration properties DiffProgram.Windows and DiffProgram.Linux to allow configuring visual difference program for each environment without having to change the single DiffProgram configuration property, and default to KDiff3 as an example of typical use.
  • change [14.0.1] Update the following commands to list datastores opened with OpenDataStore command, used in automated testing (previously only listed datastores that are opened at startup, which limited the ability to edit command parameters):
  • change [14.0.1] Message dialogs now show text that can be highlighted and copied.
  • change [14.0.1] Update the CreateRegressionTestCommandFile command:
    • Improve how test suites are handled with IncludeTestSuite and ExcludeTestSuite. The behavior is now intuitive.
    • Add support for @os linux, which is equivalent to @os UNIX.
    • Allow the SearchFolder parameter to list more than one folder
  • change [14.0.1] Update the FormatTableDateTime command to support seconds for IncrementBaseUnit parameter.
  • change [14.0.1] Update the Message command to have PromptActions parameter, which enables interactive prompts to confirm message in command workflows, for example to prompt for confirmation for destructive actions such as removing files and folders.
  • change [14.0.1] Update the ReadStateModB command to have OutputVersion parameter, which allows converting old data files to current format.
  • change [14.0.1] Update the ReadTableFromDataStore command:
    • allow newline character in Sql parameter to format multi-line SQL
    • default floating point column precision to 6 digits for SQLite databases
    • add OutputProperties parameter to set output properties when a single row is returned
  • change [14.0.1] Update the ReadTableFromDelimitedFile command to accept space for Delimiter parameter, using \s notation.
  • change [14.0.1] Update the RunCommands command to have StdoutProperty parameter.
  • change [14.0.1] Fix the Wait command to properly handle small wait time specified as decimal fraction of second.
  • change [14.0.1] Update the WriteTableToDelimitedFile command to have IncludeColumns and ExcludeColumns parameters.
  • new [14.0.1] Add --datastore-substitute=datastore,substitute TSTool program parameter to specify substitute datastore name, useful for automated testing.

Changes in Version 14.0.0

This is the first 64-bit Java release. See also many new features that were added in the last 13.x releases.

  • change [14.0.0] This is the first 64-bit release with new major version number 14:
    • Installing version 14 will automatically copy a user's .tstool configuration files for previous version to this version.
    • The HEC-DSS features are disabled. Additional resources are needed to update the software to use 64-bit libraries for HEC-DSS.
    • This 64-bit version is constrained only by available memory on the computer and can be configured to use more memory for large datasets, if necessary. This is an improvement over the 32-bit version, which was constrained to approximately 1.2 GB of memory use.
  • change [14.0.0] Enhance the raster graph:
    • The ProcessRasterGraph command TSProductFile and OutputFile parameters can now be specified using ${Property} syntax.
    • Time series product file now accepts a Data property SymbolTablePath, which specifies the path to a symbol table, which describes the colors for the raster graph. If not specified, the raster graph uses deciles, after rounding the minimum and maximum values.
    • The Data property RasterGraphLegendPosition has been added, and currently always defaults to Right. A color legend is always shown.
    • An optional mouse tracker can be enabled in the graph window.
    • Improved the mouse position information to include the symbol table range, consistent with the symbol table for colors.
    • Improve the handling of colors.
    • Attempting to zoom cased errors. Zoom is now disabled.
  • change [14.0.0] Update the CompareTimeSeries command:
    • The WarnIfDifferent and WarnIfSame parameters have been changed to IfDifferent and IfSame to provide more flexibility, similar to other commands.
    • The CreateDiffTS parameter has been updated to provide IfDifferent option, which will only create the difference time series for cases where a difference is detected. This significantly reduces the number of output time series and increases processing speed.
    • Add DifferenceFile parameter to indicate a file listing the difference counts for all time series. The output was previously always saved in the log file, which led to large log files.
    • Add SummaryFile parameter to indicate a file listing the summary of time series with differences. Time series without differences are not included in the summary. The output was previously always saved in the log file.
    • Add MatchAlias parameter to match time series alias.
    • Improve error checks and warnings when a time series cannot be matched.
    • Improve performance.
  • change [14.0.0] Update the ReadStateCUB command:
    • Added the OutputVersion parameter to allow old binary files to be translated to latest format, necessary to minimize differences when testing.
  • change [14.0.0] Update the ReadStateModB command:
    • Ignores parameter with name NA, which are placeholders that don't have data.
    • Handle the case where b44 (reservoir) file contains no reservoir stations.
    • Add IfFileNotFound parameter to provide more control over error handling.
  • change [14.0.0] Add the --java-xmx parameter to the Linux tstool shell script to set the maximum computer memory to use for TSTool Java Runtime Environment.
  • new [14.0.0] Added the --space-replacement TSTool command line parameter to help with commands lines that include spaces in parameters.