Skip to content

TSTool / Datastore Reference / ReclamationHDB

Overview

The ReclamationHDB datastore corresponds to the US Bureau of Reclamation’s HDB database (version 2), which stores real-time and historical data related to Reclamation operations. Time series in HDB are organized into “real” tables (observations) and “model” tables (from simulations or other external processes).

Standard Time Series Properties

The standard time series identifier for ReclamationHDB time series is of the form:

LocationType:LocationID.DataSource.DataType.Interval.Scenario~DataStoreName

More specifically, the identifier follows the following convention for “real” data:

ObjectTypeName:SiteDataTypeID.HDB.DataTypeCommonName.Interval.SiteCommonName~DataStoreName

and the following for “model” data:

ObjectTypeName:SiteDataTypeID.HDB.DataTypeCommonName.Interval.SiteCommonName-ModelName-ModelRunName-HydrologicIndicator-ModelRunDate~DataStoreName

Because only the site data type identifier (SDI) and model run identifier (MRI) are guaranteed to be unique, they are used as the primary data in the TSID. Other information is used by convention to improve usability for users, but is not required.

Prior to TSTool 10.24.00 time series identifiers followed the convention shown below. This convention is still handled as much as possible; however, because SiteCommonName is not guaranteed to be unique and because model identifier parts contain periods, dashes, and other characters, such identifiers could not be guaranteed to uniquely and reliably identify time series.

Location.DataSource.DataType.Interval.Scenario~DataStoreName

More specifically, the identifier for “real” data prior to TSTool 10.24.00 follows the convention:

Real:SiteCommonName.HDB.DataTypeCommonName.Interval~DataStoreName

and the following for “model” data prior to TSTool 10.24.00:

Model:SiteCommonName.HDB.DataTypeCommonName.Interval.ModelName-ModelRunName-HydrologicIndicator-ModelRunDate~DataStoreName

Time series identifier parts and other time series metadata are described below:

  • The TSID location type is set to the object type name, for example diversion or reservoir.
  • The TSID location identifier is set to the site data type identifier (SDI) for real time series and is additionally appended with the model run identifier (MRI) for model time series. These integer identifiers are guaranteed to be unique and not change over time. Although these values are enough to allow time series to be uniquely identified in the database, additional metadata are by convention provided in the data type and scenario TSID parts, as described below.
  • The TSID data source is set to HDB in all cases. The HDB design does include agency in several tables, but the information is not integrated enough to be used as part of the TSID:
    • The HDB_AGEN table lists agencies that are known in the database. AGEN_NAME is populated; however, AGEN_ABBREV often is null and cannot be relied upon for use in time series identifiers.
    • The HDB_DATATYPE table includes AGEN_ID, which relates to the HDB_AGEN table. However, many values are null and the relationship is not enforced.
    • The R_BASE.AGEN_ID value indicates the agency for which values are measured. The general guideline for HDB is that the last data in the table overwrites records. The final data record stored for a site that receives data from multiple agencies is controlled by the Reclamation data load processes. TSTool allows the agency to be specified when writing records, but there is currently no way to request records that were reported by an agency. The agency in this design is simply an annotation to explain the source of the data measurements.
  • The TSID data type is set to DataTypeCommonName and is taken from the HDB_DATATYPE.DATATYPE_COMMON_NAME column.
  • Interval is the data interval using TSTool standards (e.g., Hour, Day, Month, Year, Irregular). HDB does not include metadata for the time series interval. Instead, the data tables (e.g., R_DAY) must be queried to determine if a time series for a specific interval exists. This join occurs when interactively querying time series lists in TSTool to assist the user in forming valid time series identifiers (however, this does result in a slight performance penalty when listing time series).
  • The TSID scenario contains dash-separated model metadata to help users interpret data:
    • SiteCommonName (fromHDB_SITE.SITE_COMMON_NAME`).
    • ModelName (from HDB_MODEL.MODEL_NAME), only for model time series.
    • ModelRunName (from REF_MODEL_RUN.MODEL_RUN_NAME), only for model time series.
    • HydrologicIndicator (from REF_MODEL_RUN.HYDROLOGIC_INDICATOR), only for model time series.
    • ModelRunDate (from REF_MODEL_RUN.RUN_DATE), to the full second, only for model time series. This latter four values are necessary to fully match a model run.
  • DataStoreName is the user-defined datastore name from the configuration information.
  • The time zone for hourly time series is set to the TIME_ZONE property from the HDB REF_DB_PARAMETER table.
  • Missing numerical values are internally indicated with NaN.

Limitations

ReclamationHDB datastore limitations relative to TSTool standard features are as follows:

  • Some database string values that are used in time series identifiers may contain periods, which conflict with the TSID conventions. These characters are converted to a space in the TSID representation. Because the current TSID convention relies on SDI and MDI, text parts of the TSID are not used to look up information in the database and the issue of special characters is lessened. An alternative to relying on TSID commands is to use the ReadReclamationHDB command and assign an alias to time series.
    • Although data flags are available with data records, they currently are not set in time series data during reads. A future enhancement may transfer the flags.
  • HDB time series data tables have a START_DATE_TIME and END_DATE_TIME date/time for each data value, indicating the time span over which data are collected/averaged/summed. However, TSTool uses only a single date/time for each value, which is the same value shown in tables and used for graphing. The TSTool convention is that date/times for instantaneous values correspond to the date/time of the observation, and mean and accumulated values have a date/time corresponding to the interval end. For example, a 1-hour accumulated value recorded at YYYY-MM-DD HH would be for the hour ending HH. The following table illustrates the date/time conversions that are applied, using example data for site ADATUNCO flow volume (HOUR, DAY) and diversion volume (MONTH, YEAR). In summary, for HOUR interval, the HDB END_DATE_TIME corresponds to the TSTool date/time and for others the HDB START_DATE_TIME corresponds to the TSTool date/time.
Data Interval HDB START_DATE_TIME HDB END_DATE_TIME           HDB POET date/time           TSTool date/time      
HOUR 2007-04-04 13:00:00.0 (UNIX time if MST time zone: 1175716800000) 2007-04-04 14:00:00.0 4/4/2007 2:00 PM 2007-04-04 14
DAY 2007-04-05 00:00:00.0 2007-04-06 00:00:00.0 4/5/2007 2007-04-05
MONTH 1978-01-01 00:00:00.0 1978-02-01 00:00:00.0 1/1/1978 1978-01
YEAR 1978-01-01 00:00:00.0 1979-01-01 00:00:00.0 1/1/1978 1978
IRREGULAR 1978-01-01 01:15:00.0 1978-01-01 01:15:00.0 1978-01-01 01:15
  • When writing hourly and instantaneous time series using the WRITE_TO_HDB procedure, the start time is specified as UNIX time (milliseconds since Jan 1, 1970 00:00:00 at GMT) and the time zone of the data is also specified. The HDB time zone is constant for the entire database, and is typically in a standard time zone such as MST (equivalent to GMT-07:00). The WRITE_TO_HDB procedure allows the time series time zone to be specified. If different than the database time zone (for example time series PST and database is MST), then the UNIX time for the start time is adjusted for the difference between the database time zone and the time series (for example the UNIX time will be incremented by 3600 seconds to convert PST to MST because the PST time would be an hour later in MST and consequently also an hour later in GMT). When reading the hourly time series, TSTool will automatically assign the HDB time zone to the output time series (for example MST).
  • TSTool supports 6Hour and other multiples of each base interval. However, HDB only stores 1Hour data (although this limitation may be removed in the future). When 6Hour data are stored in HDB, the user must specify the interval because there is no way to determine it from HDB. For example, if a 6Hour time series is written to HDB and is then read as 1Hour, TSTool will show a value every 6 hours, with intervening missing values.
  • TSTool currently does not support reading HDB water year time series.
  • Performance for reading hourly time series is slow. This appears to be in the conversion of Oracle date/times to internal representations. Writing data also is slow. These issues may be improved in the future.

Datastore Configuration File

A datastore is configured by enabling ReclamationHDB datastores in the main TSTool.cfg configuration file, and creating a datastore configuration file for each datastore connection. Configurations are processed at software startup. An example of the TSTool configuration file is shown below. Properties for each datastore are specified in an accompanying configuration file described below.

# Configuration file for TSTool

[TSTool]

ReclamationHDBEnabled = true

TSTool Configuration File with ReclamationHDB Datastore Properties

The following illustrates the ReclamationHDB datastore configuration file format. When installed on a Linux system, the file is typically located in the installation files datastores folder. This example configures the “HDB” datastore. Authentication for writing data to the database is checked based on the account login and password.

# Configuration information for "HDB" datastore (connection).
#
# The user will see the following when interacting with the datastore:
#
# Type – ReclamationHDBDataStore (required as indicated)
# Name - database identifier for use in applications, for example as the
#     input type/name information for time series identifiers (usually a short string)
# Description - database description for reports and user interfaces (a sentence)
# Enabled – whether the datastore is enabled (default=True)
#
# The following are needed to make the low-level data connection:
#
# Type – the datastore type (must be specified exactly as shown)
# DatabaseEngine - the database software (default to Oracle since not specified)
# DatabaseServer - IP or string address for database server
# DatabaseName - database name used by the server
# DatabasePort - database connection port (will default to 1521 if not specified
# Enabled – indicates whether datastore is enabled (True or False, default=True)
# SystemLogin – service account login or “prompt” to display login dialog in TSTool
# SystemPassword – service account password or “prompt” to display login dialog in TSTool
#
# Use the syntax Env:EnvVarName to retrieve values from the environment.
# Use the syntax SysProp:SysPropName to retrieve values from the JRE system environment.
# Use the syntax Prompt to prompt the user

Type = "ReclamationHDBDataStore"
Name = "HDB"
Description = "Reclamation Test Database"
DatabaseServer = "xxx"
DatabaseName = "xxx"
DatabasePort = 1521
SystemLogin = "Prompt"
SystemPassword = "Prompt"
# See documentation below for meaning of the following
TSIDStyle = SDI_MRI
ReadNHourEndDateTime = StartDateTimePlusInterval
ConnectTimeout = 120
ReadTimeout = 3600

ReclamationHDB Datastore Configuration File

The following table describes the datastore properties.

ReclamationHDB Datastore Configuration Parameters

Parameter                                                       Description Default        
Enabled Specify whether the datastore should be enabled (True) or disabled (False). Disabled datastores will not be initialized for use in TSTool. True
Type Must be ReclamationHDBDataStore. None – must be specified.
DatabaseEngine Indicates database software. For HDB, it should be Oracle. Oracle
Name The name to use for the datastore, which will be displayed in user interfaces and commands. None – must be specified.
Description A longer description for the datastore, used in interfaces. None – must be specified.
DatabaseServer The computer name or IP address for the database server. None – must be specified.
DatabaseName The database name. None – must be specified.
DatabasePort The port to use for the database connection. 1521 for Oracle.
SystemLogin The database user account login, which can be one of:
  • literal string
  • Env:EnvVariable – specify using an environment variable named EnvVariable
  • SysProp:JavaRuntimeProperty – specify using a Java Runtime Environment property named JavaRuntimeProperty
  • Prompt – a login dialog will be shown after TSTool starts
 None – must be specified.
SystemPassword The database user account password. Specify similar to SystemLogin. None – must be specified.
ConnectTimeout The timeout in seconds for the initial database connection. No limit.
ReadNHourEndDateTime The WRITE_TO_HDB stored procedure should allow an end date to be offset from the start date by NHour. However, it appears to always offset by 1Hour. Therefore the end date cannot be relied upon for the TSTool date/time when reading. This property adjusts the handling of the end date:
  • EndDateTime – use if WRITE_TO_HDB does write the end date offset as expected
  • StartDateTimePlusInterval – use to compensate for WRITE_TO_HDB not writing the end_date_time with offset
 StartDateTime
PlusIntervalReadTimeout The timeout in seconds for query statements. No limit.
ResultSetFetchSize Specify the number of records returned at a time during query processing. The default is 10 but higher values increase performance. 10000
TSIDStyle Indicates how TSTool should create time series identifiers in the main interface:
  • CommonID – old style that used common name for identifiers – prone to issues because of non-unique values in HDB and special characters including periods and dashes
  • SDI_MRI – new style that relies on SDI and MRI integer values, which are guaranteed unique
 SDI_MRI
WriteToHDBInsertStatementMax Specify the maximum number of rows for a batch insert when writing time series. A default value of 10000 has been used with success. 10000

Database Authentication and Timeouts

The SystemLogin and SystemPassword datastore configuration parameters are used to authenticate the database user. If either are set to Prompt in the configuration file, then the following dialog will be shown when TSTool starts.

ReclamationHDB Datastore Login Dialog for Initial Login

ReclamationHDB Datastore Login Dialog for Initial Login (see full-size image)

Only the login and password can be specified. If necessary, change the datastore configuration file to change other parameter values. After TSTool starts, the File / Open / Reclamation HDB menu can be used to change a datastore login to a different account, as shown below:

ReclamationHDB Datastore Login Dialog after Startup

ReclamationHDB Datastore Login Dialog after Startup (see full-size image)

HDB database connections can timeout or drop. TSTool checks the connection at key points, including TSTool setup, before reading time series and tables, and before writing time series. If the connection has closed dropped, a new one is opened before data queries are executed. Normally software users will not see an impact other than perhaps a slight pause as the new connection is established.

Technical Note – Handling Time Zone

TSTool uses internal DateTime objects for date/time. These objects allow date/time values to be set as familiar for digital clocks and calendars (year = 4 digits, month=1-12, day=1-31, hour=0-23, minute=0-59, second=0-59). The time zone is typically set when reading data from sources that report the time zone.

  • Reading HDB hourly and instantaneous data results in the time zone being set to the database time zone property from the ref_db_parameter table. For example, the ECAO Reclamation office HDB uses MST internally for all data. This is defined in the ref_db_parameter table where PARAM_NAME=TIME_ZONE.
  • When writing time series to HDB the time zone should be set from the original source in order to accurately match the timestamps for data values. Time zone should be set to the time zone identifier such as MST or America/Denver, rather than the display string, which may reflect daylight savings (e.g., MDT, which is in effect for only part of the year). For example, the ReadNrcsAwdb and ReadDelftFewsPiXml commands have parameters to set time zone to standard time corresponding to the time series (rather than local time on the computer). In general, a time zone that does not use daylight savings should be used for data management (e.g., MST, as is used in ECAO HDB), and if desired, a local time zone that does use daylight savings (e.g., MST7MDT or America/Denver) can be used by tools that display data. Avoiding time zones that use daylight savings ensures that the data record is continuous and is not impacted by shifts twice a year.

Time zones are specified in the following locations and impact TSTool:

  • Computer operating system
    • Generally uses a time zone like America/Denver, which allows date/times to be displayed in local time and includes daylight saving adjustments
    • Windows 7:
      • tzutil /g (for example shows Mountain Standard Time, which is actually somewhat confusing because it is not clear whether it recognizes daylight saving time)
    • Linux:
      • echo $TZ (for example shows America/Denver)
  • Java Runtime Environment
    • Time zone typically defaults to the time zone of the operating system
    • Time zone can be manipulated using Date, TimeZone, Calendar classes.
    • Internally times in several classes are managed as UNIX time, ms since Jan 1, 1970 00:00:00 GMT.
  • TSTool
    • Default when Java classes are used is local time zone but can be controlled
    • DateTime class uses time zone string assigned when reading data
    • Converts time zones as appropriate when processing data, as documented
  • Oracle database
    • Session time zone used for user sessions
    • Database time zone (see dbtimezone below)
  • HDB timezone:
    • Set in ref_db_parameter and is used by procedure logic, etc., independent of Oracle database time zone
    • Time series tables use date/times for MST, independent of Oracle database time zone
  • Java JDBC driver, which uses java.sql.TimeStep.TimeStep and other classes to transfer Java objects into database persistent date/time values.
    • Care must be taken to ensure that in-memory date/time objects provide appropriate values to database objects when writing, and translate database objects to memory when reading
    • For example, see: Is java.sql.Timestamp timezone specific?

Oracle time zones are as follows (for ECAO database). See the following for an explanation of DUAL table. These time zones are only important when database columns are defined to use time zone (and HDB time series columns are not so session time should not be relevant).

select dbtimezone from dual;

returns: +00.00

select SESSIONTIME from DUAL;

returns: America/Denver

The HDB R_HOUR and other time series tables are defined using data timestamps without time zone, for example:

CREATE TABLE R_HOUR
(
   SITE_DATATYPE_ID decimal(11,0) NOT NULL,
   START_DATE_TIME timestamp NOT NULL,
   END_DATE_TIME timestamp NOT NULL,
   DATE_TIME_LOADED timestamp NOT NULL,
   VALUE float(126) NOT NULL,
   SOURCE_ID decimal(11,0),
   VALIDATION char(1),
   OVERWRITE_FLAG varchar2(1),
   METHOD_ID decimal(22,0),
   DERIVATION_FLAGS varchar2(20),
   CONSTRAINT R_HOUR_PK PRIMARY KEY (SITE_DATATYPE_ID,START_DATE_TIME)
);
CREATE UNIQUE INDEX R_HOUR_PK ON R_HOUR
(
  SITE_DATATYPE_ID,
  START_DATE_TIME
);
CREATE INDEX R_HOUR_DATE_IDX ON R_HOUR(START_DATE_TIME);

This definition indicates that the timestamp will not have a local time zone and consequently within the database the timestamps are stored with date/time values but not time zone. See: Oracle dates, timestamps, and intervals. The values are actually stored as individual numbers (not number of seconds since a datum, for example) and must correspond with the HDB database time zone defined by ref_db_parameter.

Writing to HDB

The WRITE_TO_HDB procedure takes as input several time-related parameters, including the timestamps for the start of the sample interval (SAMPLE_DATE_TIME), end of the sample interval (SAMPLE_END_DATE_TIME), and the time zone for data (TIME_ZONE).

PROCEDURE WRITE_TO_HDB (
            SAMPLE_SDI              NUMBER,
            SAMPLE_DATE_TIME        DATE,
            SAMPLE_VALUE            FLOAT,
                    SAMPLE_INTERVAL         VARCHAR2,
                    LOADING_APP_ID          NUMBER,
                    COMPUTE_ID              NUMBER,
                    MODELRUN_ID             NUMBER,
                    VALIDATION_FLAG         CHAR,
                    DATA_FLAGS              VARCHAR2,
                    TIME_ZONE           VARCHAR2 DEFAULT NULL,
                    OVERWRITE_FLAG          VARCHAR2 DEFAULT NULL,
                    AGEN_ID         NUMBER   DEFAULT NULL,
            SAMPLE_END_DATE_TIME    DATE     DEFAULT NULL
)

Note that the SAMPLE_DATE_TIME, which is the start of the interval, is a DATE type, which includes date and time to second, but no time zone. TSTool uses the Java java.sql.TimeStamp.TimeStamp object to define the timestamp, where the objects are created using UNIX time. See the Java JDBC driver documentation, which is included below, for information about handling timestamps.

Start article...

Although it is not explicitly specified for setTimestamp(int parameterIndex, Timestamp x) drivers have to follow the rules established by the setTimestamp(int parameterIndex, Timestamp x, Calendar cal) javadoc: Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a Calendar object, the driver can calculate the timestamp taking into account a custom time zone. If no Calendar object is specified, the driver uses the default time zone, which is that of the virtual machine running the application. When you call with setTimestamp(int parameterIndex, Timestamp x) the JDBC driver uses the time zone of the virtual machine to calculate the date and time of the timestamp in that time zone. This date and time is what is stored in the database, and if the database column does not store time zone information, then any information about the zone is lost (which means it is up to the application(s) using the database to use the same time zone consistently or come up with another scheme to discern timezone (ie store in a separate column). For example: Your local time zone is GMT+2. You store "2012-12-25 10:00:00 UTC". The actual value stored in the database is "2012-12-25 12:00:00". You retrieve it again: you get it back again as "2012-12-25 10:00:00 UTC" (but only if you retrieve it using getTimestamp(..)), but when another application accesses the database in time zone GMT+0, it will retrieve the timestamp as "2012-12-25 12:00:00 UTC". If you want to store it in a different timezone, then you need to use the setTimestamp(int parameterIndex, Timestamp x, Calendar cal) with a Calendar instance in the required timezone. Just make sure you also use the equivalent getter with the same time zone when retrieving values (if you use a TIMESTAMP without timezone information in your database). So, assuming you want to store the actual GMT timezone, you need to use: Calendar cal = Calendar.getInstance(TimeZone.getTimeZone("GMT")); stmt.setTimestamp(11, tsSchedStartTime, cal); With JDBC 4.2 a compliant driver should support java.time.LocalDateTime (and java.time.LocalTime) for TIMESTAMP (and TIME) through get/set/updateObject. The java.time.Local* classes are without time zones, so no conversion needs to be applied (although that might open a new set of problems if your code did assume a specific time zone).

end article

See also: Oracle TIMESTAMP and TIMEZONE

Note the highlight above. It is dangerous to use the default time zone, which will likely reflect daylight savings time. Instead, all time series written to HDB should use a standard time zone such as MST. Within TSTool, timestamps are created in such a way that the time series time zone is taken into consideration. For example, when writing 3Hour data:

  1. TSTool DateTime object for interval-end data = 2010-03-13 00 MST (TSTool DateTime object only uses a Java Date object when needed but does not use to store the date/time)
  2. WriteReclamationHDB command:
    1. converts to Java Date (2010-03-13 00 with time zone MST)
    2. converts to 1268463600000 ms UNIX time from Java Date object
    3. shift left 3hours = 3600s31000 = 1268463600000 – 108000000 = 1268452800000 ms because WRITE_TO_HDB SAMPLE_DATE_TIME is at the start of the interval
    4. creates java.sql.TimeStamp.TimeStamp with the UNIX time and time zone MST
  3. HDB WRITE_TO_HDB procedure:
    1. Expects Oracle DATE object, which will have been passed from the JDBC drive as TimeStamp.
    2. Database SAMPLE_DATE_TIME = 2010-03-12 21 (note shifted 3 hours to left since interval start)

If the TIME_ZONE passed into WRITE_TO_HDB is not the same as the database time zone, then for hourly and instantaneous data the database time is calculated as follows:

START_DATE_TIME := new_time(START_DATE_TIME,TIME_ZONE,db_timezone);
       END_DATE_TIME := new_time(SAMPLE_END_DATE_TIME,TIME_ZONE,db_timezone);

See the documentation for the Oracle new_time function.

For example, calling:

new_time(START_DATE_TIME,’PST’,’MST’)

will result in PST times being shifted to MST times.

Reading from HDB

Reading from HDB using TSTool involves the following steps:

  1. ReadReclamationHDB command:
    1. JDBC SQL statements are used to query the appropriate time series data table.
    2. java.sql.TimeStamp.TimeStamp returned for HDB time series SAMPLE_DATE_TIME include values for MST time zone, although MST is not indicated as the time zone. This is because HDB columns for date/time are of type TIMESTAMP without local time zone. Time zone is only relevant for hourly and instantaneous time series.
    3. Convert date/times to TSTool DateTime objects. Time zone is set to HDB time zone (e.g., MST for ECAO HDB).
    4. Shift the TSTool DateTime to reflect that HDB values are stored at the start of the interval whereas TSTool uses the end of the interval. For example, for 3Hour data, the HDB SAMPLE_DATE_TIME in time series tables is shifted by 3 hours later because SAMPLE_END_DATE_TIME always seems to be 1 hour later rather than 3 hours. For other than NHour interval, use the SAMPLE_END_DATE_TIME for the TSTool time.

There is potential that through faulty data loading that time series values will have been written to HDB in time slots that are not valid. For example, TSTool 11.10.00 fixed a bug where previous versions did not handle daylight savings change properly and some data were one hour off. When reading data, TSTool queries all data in a period. If the interval is other than NHour, TSTool has no choice but to process all the data. Issues would only occur if later data loads did not cover the full period of previous faulty data loads.

For NHour data, the case may arise where a faulty data load inserts values at the wrong hours. When reading, TSTool may think that these values are valid. This is problematic because the values are not at the correct hour and because TSTool may assume that the sequence of NHour data starts on the wrong hour. To address this issue, the ReadReclamationHDB command will confirm that all data that are read are a multiple of NHour apart, using the first record that is read to indicate the initial offset. If data are not all spaced according to the NHour interval, the time series contents will be set to missing and a command warning will be generated. There are two ways to fix this issue:

  1. Delete the time series data from the database and then reload correctly. TSTool does not provide a way to delete time series data so a different tool must be used.
  2. Use the NHourIntervalOffset parameter with the ReadReclamationHDB command to tell TSTool that data are expected only on a certain offset, and all other data will be ignored. This does not clean up the database but does at least ensure that the correct data are read. This approach requires some effort to understand how data were loaded into the database

Examples

The following examples illustrate how to use the ReclamationHDB datastore with TSTool.

Writing State of Colorado Streamflow Station Time Series to HDB

The State of Colorado publishes data using web services. TSTool is able to read these web services using the built-in HydroBaseWeb datastore. See the ColoradoHydroBaseRest datastore documentation for information about available data types. Use the TSTool user interface to list time series and create TSID commands in order to understand how to uniquely identify time series.

The following is a simple example for reading average daily flow for a State of Colorado station and writing to HDB, for a historical period:

SetInputPeriod(InputStart="2021-01-01",InputEnd="2021-12-31")
abbrev:BTBLESCO.DWR.Streamflow-Avg.Day~HydroBaseWeb
WriteReclamationHDB(DataStore="hdbtest1",TSList=AllMatchingTSID,TSID="abbrev:BTBLESCO.DWR.Streamflow-Avg.Day~HydroBaseWeb",SiteDataTypeID=100247,Agency="CODWR",CollectionSystem="(see agency)",Method="copy of data",TimeZone="MST",WriteProcedure="WRITE_DATA")

The following are technical considerations:

  1. Streamflow time series data are available from:
    1. Surface Water Station - Streamflow* data type time series for historical data, which include stations maintained by the State of Colorado (only has CO Abbrev identifiers) and stations cooperatively maintained with the USGS (have CO Abbrev and USGS Site ID). If a USGS identifier is available, it is selected by default by the TSTool user interface in order to facilitate cross-reference with USGS web services. If it is desired to force use of the State's abbreviation, edit the command and change the location time in the time series identifier from usgs: to abbrev:.
    2. Telemetry Station - DISCHRG* (discharge) and Telemetry Station - GAGE_HT* (stage) data type time series for real-time data, which use the State of Colorado abbreviation for identifier by default. Telemetry station parameters vary by location. Use the TSTool interface and query data type Telemetry Station - * to list all available time series. For example, a station may be installed at a confluence and use one site ID but multiple DISCHRG parameters to collect data from nearby tributaries. Contact the Division of Water Resources water commissioner if necessary or use the CDSS Online Tools for more information about stations.
  2. The historical time series have smallest interval Day and the real-time data have largest interval Day, but the period of record for each depends on State of Colorado processes to archive real-time data as historical data. Therefore, the data for a station should be reviewed to decide which time series are best for an application.
  3. The previous sections of this page describe how to write time series to Reclamation HDB database. The site and related data must be defined first, before using TSTool to load data. TSTool does not provide features to define sites and other data.
  4. To load multiple time series, consider using the following commands:
    • ReadColoradoHydroBaseRest - reads more than one time series
    • ReadTimeSeriesList - to read a list of time series given a table of identifier information
    • For - loop over commands, which avoids the need to expand a template command file, for example to loop over the time series listed in a table, to write to HDB