TSTool / Command / Comment #
Overview
Single-line comments start with #, for example as shown below.
Single line comments have the advantage that each line is clearly a comment
and comment lines can be easily copied, moved, and deleted.
# This is one comment.
# This is another comment.
Spaces and tabs before the comment character are currently not allowed.
Comments cannot be added after commands (comments must exist on their own command line).
Commands can be converted to and from # comments by right-clicking on a command in TSTool
and selecting Convert selected commands to # comments and
Convert selected commands from # comments from the popup menu.
See also the /* and */
comment block commands, which are used to comment multiple commands, for example as shown below.
Block comments have the disadvantage that badly closed blocks can result in confusing errors
as software tries to interpret the input.
Block comments are useful for temporarily commenting out multiple commands, such as during troubleshooting a workflow.
The Exit command can also be used to stop processing and skip commands
that follow the Exit command.
/*
Comment line 1.
Comment line 2.
OneCommand()
AnotherCommand()
*/
Annotations
Annotations are special comments with syntax #@annotation ... that provide additional information to software.
Whereas commands execute some action, annotations provide additional information that can
be checked without depending on the results of commands.
Software can read annotations from comments,
perform checks before a command file is processed,
and provide diagnostic messages that ensure that a command file is OK to run.
Examples of annotation use include:
- indicate whether the command file is read-only
- indicate the author, version, documentation URL and source URL for the command file to help with maintenance
- indicate whether the command file is a template that requires expansion before processing
- indicate the expected status for a command file used in testing, which allows success and failure conditions to be handled
- indicate input requirements for the command file, such as software and datastore characteristics, including version and configuration properties
- indicate whether a root/admin user is required to run the command file, useful when testing system-level software on Linux
The following examples illustrate typical annotation syntax. In some cases, annotations have no parameters and in other cases parameters may be optional or required.
#@readOnly
#@expectedStatus Failure
Annotation comments can be added by editing the # comment block or use the Commmands / General - Comments menu.
Annotations that are more complex, such as datastore requirements, must be edited with general
comment editor, referring to the datastore documentation to review annotation syntax.
Badly-formatted annotation comments may result in a warning or error for the comment.
The Tools / Commands menu provides tools to compare the current commands with the original source (e.g., in a GitHub repository) and to check whether the original source has been updated.
The following table lists annotation tags that can be placed in comments to provide additional information to software that processes the commands.
# Comment Command Annotation Tags
| Annotation Tag | Command/Component That Uses | Description |
|---|---|---|
@author First Last, email, etc. |
TSTool main interface. | The author of the command file, to provide attribution and a contact point for support. There is no standard format for the information. Multiple annotations can be specified. |
@docExample |
TSTool main interface | Used by developers to tag automated tests as an example to use with documentation (e.g., screen shots for documentation). Typically one or a few tests are tagged to make it easy to find the example when updating documentation. |
@docUrl https://path/to/doc/ |
TSTool main interface. | The URL for documentation for the command file, for example a README.md Markdown file specific to the command file or a larger document that provides an overview of the workflow. |
@enabled False |
Command processor. | Used in automated tests. Used to disable a command file. For example, use this annotation in a test command file when the test is not ready for use in the software release process. |
@enabledif ... |
Command processor. | Used in automated tests. The syntax is the same as @require, with the result being that if any conditions are not met, the command file is disabled. Multiple annotations can be used, each with different requirements, for example to ensure that functionality is tested with different versions of a database datastore and software version. |
@expectedStatus Failure@expectedStatus Warning |
RunCommands command |
Used in automated tests. Used to help the test framework know if an error or warning is expected, in which case a test can pass even if the command status is not “success”. If the actual status from a command file (most severe status of all commands) does not match the expected status, the user interface will indicate a failure. |
@fixme ... |
Indicate something to fix, such as a bug in the command file logic. A comment typically has the form #@fixme user date Comment, for example: #@fixme smalers 2021-06-14 Need to fix the following input file. A blue notification marker will be shown in the command list. A future TSTool enhancement is planned to list such annotations in the Results area. |
|
@os Windows@os UNIX |
CreateRegressionTestCommandFile command |
Used in automated tests. Used to filter out test command files that are not appropriate for the operating system. Linux is included in UNIX. May be replaced by @require in the future. |
@readOnly |
TSTool main interface and command editors | Used to restrict command file editing. Indicates that the command file should not be edited. TSTool will update old command syntax to current syntax when a command file is loaded. However, this tag will cause the software to warn the user when saving the command file, so that they can cancel. This tag is often used with templates to protect the template from mistakenly being edited and saved in TSTool (TSTool does not currently allow editing templates within the interface). |
@require application TSTool version >= NN.NN.NN |
Command processor | Used to ensure compatibility. Indicate that an application version (in this case for TSTool software) is required to run the command file. The operator can be >, >=, =, <, or <=. The version should be specified using Semantic versioning, for example 14.2.2. Each part of the version is checked numerically and leading zeros are ignored; therefore 03 evaluates to 3. If specified for automated tests, a test will only be run if the criteria are met, which allows tests to be developed for specific versions of the software. If the criteria are not met during normal runs, an error is generated. Use multiple @require comments if necessary for multiple criteria checks. |
@require datastore HydroBase version >= YYYYMMDD |
Command processor | Used to ensure compatibility. The syntax after the datastore name depends on the features implemented for a datastore (see the datastore's documenation). Indicate that a datastore version (in this case for datastore named HydroBase) is required to run the command file. The operator can be >, >=, =, <, or <=. The version string must be consistent with what is expected for a datastore. For example, HydroBase versions use the YYYYMMDD syntax, whereas other datastores use semantic versions or other date strings. Refer to the datastore reference documentation for version format information. Not all datastores support version checks. If specified for automated tests, the test will only be run if the criteria are met, which allows tests to be developed for specific versions of the software. If the criteria are not met during normal runs, an error is generated. Use multiple @require comments if necessary for multiple criteria checks. |
@require user == name@require user != name |
Command processor | Used to ensure compatibility. Indicate whether the command file is restricted to a certain user. This has mainly been used to ensure that automated tests are run as the correct user. Tests can be grouped by user using a test suite. A user requirement that fails causes command processing to exit. For example: @require user == root |
@sourceUrl https://path/to/source/x.tstool |
TSTool main interface, Tools / Commands. | The URL for the original source file, for example in a GitHub repository. The URL is used by TSTool features (see Tools / Commands menu) to compare the current commands with the original source. The URL should link to the raw file, not a web page that includes menus, etc. If the current command file has a different version (based on a @version annotation), a blue marker will be shown next to the command in the command list. |
@template |
TSTool main interface | Used with template processing. Indicates a template command file that is intended to be expanded with the ExpandTemplateFile command. Currently, a text file editor may need to be used to edit template files because the TSTool user interface checks commands for final syntax and may generate warnings for template files. |
@testSuite ABC |
CreateRegressionTestCommandFile command |
Used in automated tests. Used to filter out test command files that are not appropriate for the operating system. |
@todo ... |
Indicate something to do, such as a future enhancement to the command file. A comment typically has the form #@todo user date Comment, for example: #@todo smalers 2021-06-14 Need to fill the following time series. A blue notification marker will be shown in the command list. A future TSTool enhancement is planned to list such annotations in the Results area. |
|
@version 1.2.3@version YYYY-MM-DD@version YYYY-MM-DDThh:mm:ss |
TSTool main interface, Tools / Commands. | The version for the command file, used for documentation and to allow comparison when sourceUrl is specified. Specify either a semantic version (without whitespace in the version string) or an ISO 8601 date/time string. The version can be cross-referenced to release notes for a workflow. |
@versionDate YYYY-MM-DD@versionDate YYYY-MM-DDThh:mm:ss |
TSTool main interface, Tools / Commands. | The version date/time for the command file, used for documentation and to allow comparison when sourceUrl is specified. Specify an ISO 8601 date/time string. The version date/time indicates a release date and/or effective date/time for a workflow. If the version is the same for local and source copies of the command file, the versionDate can be used to indicate updates. |
Best Practices
Comments can be used to improve communication and maintainability, thereby reducing costs.
Because command files are text, they can be maintained in a version control system such as GitHub. Version control systems allow comments to be inserted with each version that is committed. However, such comments should not be totally relied upon to document the purpose or history of a command file. Similar to other products, it may be appropriate to add author, and release notes or history to a command file.
Comments can also be used to indicate the main processing steps in a command file so that it is easier to understand workflow logic.
The following example illustrates a few best practices that can be implemented using comments.
StartLog(...)
#
# This command file does something (explanation).
#
# @author Joe Smith, some organization
# @version 2022-02-04
# @sourceUrl https://path/to/repository/x.tstool
# @docUrl https://path/to/documentation/
#
# History:
# 2022-02-04 Added best practices discussion.
# 2021-01-03 Added annotations examples.
#
# Requirements and other metadata:
# @require application TSTool version >= 1.2.3
# @require datastore SomeDatastore version >= 3.4.5
# @todo smalers 2022-02-04 Add more error checking.
#
# ==========================================================
# Step 1 - initialize properties
#
# Explanation of the step...
# ==========================================================
SetProperty(...)
SetProperty(...)
# ==========================================================
# Step 2 - read data
# ==========================================================
Read...
# ==========================================================
# Step 3 - perform analysis
# ==========================================================
Command...
Command...
#
# Step 3b - some step...
Command Editor
The command is available in the following TSTool menu:
- Commands / General - Comments
The following dialog is used to edit the command and illustrates the command syntax.
# Command Editor (see full-size image)
Command Syntax
The command syntax is as follows. See also the Annotations section above for annotation syntax.
# A comment
# Another comment
Examples
See the automated tests.
Troubleshooting
See the main TSTool Troubleshooting documentation.