Skip to content

StateDMI / Command / WriteReservoirStationsToList


Overview

The WriteReservoirStationsToList command (for StateMod) writes reservoir stations data to a delimited file. In addition to the main station file, files with suffixes _Collections, _Accounts, _ContentAreaSeepage, _EvapStations, and _PrecipStations are written, containing secondary station information.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

WriteReservoirStationsToList command editor

WriteReservoirStationsToList Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

WriteReservoirStationsToList(Parameter="Value",...)

Command Parameters

Parameter             Description Default                
OutputFile
required
The name of the output file to write, surrounded by double quotes. None – must be specified.
WriteHow OverwriteFile if the file should be overwritten or UpdateFile if the file should be updated, resulting in the previous header being carried forward. OverwriteFile
Delimiter The delimiter character to use between columns. , (comma)

Examples

See the automated tests.

The following example illustrates how to create a list of diversion stations from a network file:

ReadReservoirStationsFromNetwork(InputFile="rg2007.net")
WriteReservoirStationsToList(OutputFile="rg2007.csv")

Troubleshooting

See the main troubleshooting documentation

See Also