4.13.14 Carrier with Constrained Demand
The type 14 operating rule provides a method to divert water to a reservoir or direct flow structure using another structure’s water rights. It is similar to the type 11 operating rule except the amount diverted is constrained by the demand of the structure associated with the source water right. Because it is an extension of the Type 11 operating rule, the amount diverted by a Type 14 rule is constrained by the source water right, carrier capacity, and the demand of the source structure. The following are noted:
- When the variable
iopsou(4,1)is equal to 0, the diverting structure's demand is limited to the monthly value read from the direct flow demand (*.ddm) file. When the variableiopsou(4,1)is greater than 1, the diverting structure's demand for the year is limited to the annual value read as variableiopsou(4,1). - The source water right may operate as a standard direct flow right and/or as a carrier. When the variable
iopsou(2,1)= 1 is the right is used as a carrier only. When the variableiopsou(2,1)= 0 the right is used as both a direct flow right and a carrier right.
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12,1x, 2f8.0, 2i8) | |
| 1-1 | cidvri | Operational right ID |
| 1-2 | nameo(1) | Operational right name |
| 1-3 | rtem(1) | Administration number. Note if ciopso(1) is a diversion right, its administration number is used and rtem is ignored. |
| 1-4 | dumx | Monthly and Structure Switch |
| +n Number of intervening structures (max = 10) | ||
| -n Include -12 monthly on/off values minus n intervening structures. Note, when a negative value is provided, it should be -13 or less) | ||
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | Destination diversion ID or reservoir ID |
| 1-7 | iopdes(2,1) | Destination structure account |
| For a diversion destination, enter 1 | ||
| For a reservoir destination, enter: | ||
| +n = Account to be served by this right | ||
| -n = Fill the first n accounts based on the ratio of their ownership | ||
| Source Data | ||
| 1-8 | ciopso(1) | Water right ID under which the diversion occurs (must be a diversion right) |
| 1-9 | iopsou(2,1) | 0 = The source water right (ciopso(1)) is left on (i.e. it can be used as a both a direct flow right and this operating rule) |
1 = The source water right (ciopso2(1) is turned off (i.e. it can only be used by this operating rule) |
||
| 1-10 | ciopso(2) | NA (not used) |
| 1-11 | iopsou(4,1) | 1 = Monthly diversion limit is provided in the direct diversion demand file (*.ddm) for ciopso(2) |
| +n = Annual diversion limit (acft). Note any data provided in the direct diversion demand file (*.ddm) is ignored. | ||
| Type Data | ||
| 1-12 | ityopr(1) | 14 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | NA |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | 0 |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 |
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if the variable (dumx) = 12 or less than -12) |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n = Day first used that month | ||
| -n = Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file | ||
| Intervening Structure Data without loss | ||
| 3 | Format (36x, 10a12) (Include only if the variable (dumx) = 1-10 or < -12 1-10 or < -12) |
|
| 3-1 | intern(1,1) | For +dumx, Enter dumx intervening structure ID's |
For -dumx, Enter abs(dumx)-12 intervening structure ID's |