Reservoir Re Diversion (ityopr=30)
The type 30 operating right allows a reservoir to re-divert water released in the same time step to a T&C plan by another operating rule.
This operating rule is similar to a standard reservoir diversion except the amount diverted is limited to the amount released by a prior
operating rule (ciopso1).This rule was developed and is commonly used because T&C releases are typically required to benefit other users before
the system knows a release was unnecessary. Therefore, when implemented properly, the senior administration number of the T&C release operates
and makes water available to other water users. Then the junior reservoir re diversion (type 30) operates to try and re-store this release if
water is available (e.g. the release was not required).
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12, 1x,2f8.0, 2i8) | |
| 1-1 | cidvri(1) | Operational right ID |
| 1-2 | nameo(1) | Operational right name |
| 1-3 | rtem(1) | Administration number |
| 1-4 | dumx | Monthly Intervening Structure Switch |
| +n = Number of intervening structures (max = 10) | ||
| 12 = Monthly (12) on/off values | ||
| -n = Include -12 monthly on/off values minus n intervening structures | ||
| Note, when a negative value is provided, it should be -13 or less for 12 monthly values and 1 intervening structure | ||
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | Destination reservoir |
| 1-7 | iopdes(2,1) | Destination account |
| Supply Data | ||
| 1-8 | ciopso(1) | Operating right ID associated with the release of water to a T&C plan |
| 1-9 | iopsou(2,1) | 0 |
| 1-10 | ciopso(2) | NA |
| 1-11 | iopsou(4,1) | 0 |
| Type Data | ||
| 1-12 | ityopr(1) | 30 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | NA |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | 0 |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 |
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if the variable (dumx) = 12 or less than -12) |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n = Day first used that month | ||
| -n = Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file | ||
| Intervening Structure Data without loss | ||
| 3 | Format (36x, 10a12) (Include only if the variable (dumx) = 1-10 or < -12) |
|
| 3-1 | intern(1,1) | For +dumx, Enter dumx intervening structure IDs |
For -dumx, Enter abs(dumx)-12 intervening structure IDs |