StateDMI / Command / CreateRiverNetworkFromNetwork

Overview
Command Editor
Command Syntax
Examples
Troubleshooting
See Also

Overview

The CreateRiverNetworkFromNetwork command (for StateMod) creates a StateMod river network from a generalized network. This is used, for example, when a change has been made to the generalized network (e.g., by editing interactively in StateDMI) and a consistent StateMod river network file must be created.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

CreateRiverNetworkFromNetwork Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

CreateRiverNetworkFromNetwork(Parameter="Value",...)

Command Parameters

Parameter	Description	Default
	There are no parameters for this command.

Examples

See the automated tests.

The following command file illustrates how a StateMod river network file can be created from the generalized network file:

StartLog(LogFile="rin.commands.StateDMI.log")
# rin.commands.StateDMI
#
# creates the river network file for the Colorado River monthly/daily models
#
#  Step 1 - read river nodes from the network file and create file framework
#
ReadNetworkFromStateMod(InputFile="cm2005.net")
CreateRiverNetworkFromNetwork()
#
#  Step 2 - get node (diversion, stream stations, reservoirs, instream flows)
#           names from HydroBase
#
FillRiverNetworkFromHydroBase(ID="*",NameFormat=StationName_NodeType)
#
#  Step 3 - read missing node names from network file
#
FillRiverNetworkFromNetwork(ID="*",NameFormat="StationName_NodeType",CommentFormat="StationID")
#
#  Step 4 - create StateMod river network file
#
WriteRiverNetworkToStateMod(OutputFile="..\StateMod\cm2005.rin")
#
# Check the results
CheckRiverNetwork(ID="*")
WriteCheckFile(OutputFile="rin.commands.StateDMI.check.html")

Troubleshooting

See the main troubleshooting documentation