Skip to content

StateDMI / Command / ReadStreamEstimateCoefficientsFromStateMod

Overview

The ReadStreamEstimateCoefficientsFromStateMod command (for StateMod) reads stream estimate coefficients from a StateMod stream estimate coefficients file. This information is associated with stream estimate stations using the station identifier as the lookup. Stream estimate coefficients define how streamflow is estimated at ungaged locations (stream estimate stations). The stream estimate coefficients that are read can be manipulated and output with other commands.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

ReadStreamEstimateCoefficientsFromStateMod command editor

ReadStreamEstimateCoefficientsFromStateMod Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

ReadStreamEstimateCoefficientsFromStateMod(Parameter="Value",...)

Command Parameters

Parameter             Description Default          
InputFile
required		 The name of the StateMod stream estimate coefficients file to be read. None – must be specified.

Examples

See the automated tests.

Troubleshooting

See the main troubleshooting documentation

See Also