StateDMI / Command / WriteClimateStationsToStateCU
Overview
The WriteClimateStationsToStateCU command (for StateCU)
writes climate stations that have been defined to a StateCU climate stations file.
Command Editor
The following dialog is used to edit the command and illustrates the command syntax.
WriteClimateStationsToStateCU Command Editor (see also the full-size image)
Command Syntax
The command syntax is as follows:
WriteClimateStationsToStateCU(Parameter="Value",...)
Command Parameters
| Parameter | Description | Default |
|---|---|---|
OutputFilerequired |
The name of the output file to write, surrounded by double quotes. | None – must be specified. |
WriteHow |
OverwriteFile if the file should be overwritten or UpdateFile if the file should be updated, resulting in the previous header being carried forward. |
OverwriteFile |
Examples
See the automated tests.
The following example command file illustrates how climate stations can be defined and written to a StateCU file:
ReadClimateStationsFromList(ListFile="climsta.lst",IDCol=1)
FillClimateStationsFromHydroBase(ID="*")
SetClimateStation(ID="3016",Region2="14080106",IfNotFound=Warn)
SetClimateStation(ID="1018",Region2="14040106",IfNotFound=Warn)
SetClimateStation(ID="1928",Elevation=6440,IfNotFound=Warn)
SetClimateStation(ID="0484",Region1="MOFFAT",IfNotFound=Add)
WriteClimateStationsToStateCU(OutputFile="COclim2006.cli")
Troubleshooting
See the main troubleshooting documentation
See Also
ReadClimateStationsFromListcommandReadClimateStationsFromStateCUcommandWriteClimateStationsToListcommand