StateDMI / Command / FillNetworkFromHydroBase

Overview
Command Editor
Command Syntax
Examples
Troubleshooting
See Also

Overview

The FillNetworkFromHydroBase command (from StateMod) fills missing location data in the generalized network, using HydroBase for data. This is used, for example, when a generalized network has been created from a StateMod river network.

Command Editor

The following dialog is used to edit the command and illustrates the command syntax.

FillNetworkFromHydroBase Command Editor (see also the full-size image)

Command Syntax

The command syntax is as follows:

FillNetworkFromHydroBase(Parameter="Value",...)

Command Parameters

Parameter	Description	Default
`LocationEstimate`	Indicates how to estimate missing coordinates, currently only: `Interpolate` – linearly interpolate between known node locations.	`Interpolate`

Examples

See the automated tests.

The following example command file illustrates how the command might be used:

# Create a generalized XML network from individual StateMod files
# Read the network, which contains upstream to downstream connectivity but does
# not indicate node types
ReadRiverNetworkFromStateMod(InputFile=cm2005.rin)
# Read the stations, which imply the node types
ReadRiverStreamGageStationsFromStateMod(InputFile=cm2005.ris)
ReadRiverDiversionStationsFromStateMod(InputFile=cm2005.dds)
ReadRiverReservoirStationsFromStateMod(InputFile=cm2005.res)
ReadRiverInstreamFlowStationsFromStateMod(InputFile=cm2005.ifs)
ReadRiverWellStationsFromStateMod(InputFile=cm2005.wes)
# To be developed...
#ReadRiverPlanStationsFromStateMod()
ReadRiverStreamEstimateStationsFromStateMod(InputFile=cm2005.ris)
# Now create the generalized network, using the connectivity and node types
CreateNetworkFromRiverNetwork()
# Fill in node names and locations from HydroBase, if any is still missing
FillNetworkFromHydroBase()
# Write the generalized network
WriteNetworkToStateMod(OutputFile="cm2005.net")
# Check for errors (the following is not yet implemented)
#CheckNetwork()
WriteCheckFile(OutputFile="cm2005.net.check.html")

Troubleshooting

See the main troubleshooting documentation