Reservoir Station File (*.res)
The reservoir station file contains information to describe the physical properties of each reservoir in the system. Reservoirs may be operated such that they
will not (iressw = 1 or 2) or will (iressw = 3) divert above their target. When a reservoir stores above its target and subsequently releases that water as part
of an operating rule, the net result is a paper fill which is charged against the reservoir right’s one fill limitation and additional water becomes available
downstream of the reservoir. This file is read by subroutine GETRES.
| Row-data | Variable | Description |
|---|---|---|
| Station Data | ||
| 1 | Format (a12, a24, a12, i8,f8.0, 1x, a12) | |
| 1-1 | cresid(1) | Reservoirstation ID |
| 1-2 | resnam(i,1) | Reservoir name |
| 1-3 | cgoto | River node where reservoir is located |
| 1-4 | iressw(1) | Switch for reservoir; |
| 0 = off, | ||
| 1 = on, Do not adjust for dead storage. Do not store above reservoir targets | ||
| 2 = on, Do not store above reservoir targets. Adjust maximum ownership and initial storage of the last account by the dead storage volume | ||
| 3 = on, Do not adjust for dead storage. Do not store above reservoir target. Charge ability to store above a reservoir target to the decree (e.g. paper fill) | ||
| 1-5 | rdate(1) | Date for one fill rule administration |
| +n = month for reoperation at the beginning of the month (e.g. 1 = January 1, 2 = February 1, etc.) | ||
| -1 = do not administer the one fill rule. | ||
| 1-6 | cresidy(1) | Daily reservoir ID (not used for monthly model). See Section 7.17 for a detailed discussion |
Enter station ID (cresid) if daily data will be provided for this station. Monthly data controls. |
||
| Enter another station ID to use the daily distribution of another but weight values by the monthly total in the reservoir target (*.tar) file or reservoir end-of-month (*.eom) file. Monthly data controls. | ||
| Enter 0 to use the average daily value from the monthly data in the reservoir target (*.tar) file or reservoir end-of-month (*.eom) file. Monthly data controls. | ||
| Enter 3 to use the daily value from the daily reservoir target (*.tad) file or reservoir end-of-day (*.eod) file. Daily data controls. | ||
| Enter 4 use a daily pattern developed by connecting the midpoints of monthly data. Monthly data controls. | ||
| Enter 5 to use a daily pattern developed by connecting the end points of monthly data. | ||
| Physical Data | ||
| Row 2 | Format (24x, 4f8.0, 4i8) | |
| 2-1 | volmin(1) | Minimum reservoir content (AF) |
| 2-2 | volmax(1) | Maximum reservoir content (AF) |
| 2-3 | flomax(1) | Maximum flow downstream of the reservoir (e.g. current stream flow plus the reservoir release (cfs) |
| 2-4 | deadst(1) | Dead storage in reservoir (AF) |
| 2-5 | nowner(1) | Number of owners |
| 2-6 | nevapo(1) | Number of evaporation stations for this reservoir |
| 2-7 | nprecp(1) | Number of precipitation stations for this reservoir |
| 2-8 | nrange(1) | Number of area capacity values |
| Owner Data | ||
| Row 3 | Format (12x, a12, 3f8.0, i8) | |
| 3-1 | ownnam(1) | Owner name |
| 3-2 | ownmax(1) | Maximum storage of owner 1 |
| 3-3 | curown(1) | Initial storage of owner 1 |
| 3-4 | pcteva(1) | Switch for evaporation distribution |
| 0 = Prorate reservoir evaporation between all accounts proportionally based on their current storage volume n. Apply n (%) to this account | ||
| -1 = No evaporation to this account | ||
| 3-5 | n2own(1) | Ownership date used for one fill calculations |
| 1 = Ownership is tied to a first fill right(s), | ||
| 2 = Ownership is tied to a second fill right(s) | ||
Repeat for the number of owners (nowner) |
||
| Evaporation Data | ||
| Row 4 | Format (24x,f8.2) | |
| 4-1 | cevar(1) | Evaporation station ID for this reservoir |
| 4-2 | weigev(1) | Percent of this station to use |
Repeat for the number of evap stations (nevapo) |
||
| Precipitation Data | ||
| Row 5 | Format (24x,,f8.2) | |
| 5-1 | cprer(1) | Precipitation station ID |
| 5-2 | weigpr(1) | Percent of this station to use |
Repeat for the number of precipitation stations (nprecp) |
||
| Area Capacity Data | ||
| Row 6 | Format (24x,3f8.0) | |
| 6-1 | conten(i,1) | Content in area capacity table for point 1 (AF) |
| 6-2 | surarea(i,1) | Area associated with the content for point 1 (ac) |
| 6-3 | seepage(irg,1) | Seepage associated with the content for point 1 (AF per month) |
Repeat above for nrange(1) values
Repeat rows 1-8 for the number of reservoirs