Output Request (*.out)
The output request file contains data which will limit the extent of selected output file requests. Note, the first two rows of data (variables ftype and parameter)
are only used by the special printout request (*.xsp). Rows 3 through n contain reference data for the structure(s) to be printed and are used by the standard
printout reports (*.xdd, *.xre, *.xir, *.xwe and *.xop). To eliminate the need to type an output request file, one is automatically generated by the check
option (-check) for every type of structure in the system. Note the default name for that file is *.xou. It is commonly renamed to *.out and referenced as such
in the response file to avoid it being overwritten whenever a new check run is made. Also the structures to be printed by that file default to print nodes where
inflow occurs (FLO) and not print other types of nodes (DIV, RES, ISF, WEL, OTH).
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a72) | |
| 1-1 | ftype | Output type switch |
| Diversion | ||
| Instream Flow | ||
| StreamGage | ||
| Reservoir | ||
| Well | ||
| Parameter Data | ||
| 2 | Format (a72) | |
| 2-1 | Parameter | For ftype = Diversion, Instream Flow or Streamgage |
| Total_Demand | ||
| CU_Demand | ||
| From_River_By_Priority | ||
| From_River_By_Storage | ||
| From_River_By_Exchange | ||
| From_Well | ||
| From_Carrier_By_Priority | ||
| From_Carrier_By_Storage | ||
| Carried_Water | ||
| From_Soil | ||
| Total_Supply | ||
| Total_Short | ||
| CU_Short | ||
| Consumptive_Use | ||
| To_Soil | ||
| Total_Return | ||
| Upstream_Inflow | ||
| Reach_Gain | ||
| Return_Flow | ||
| Well_Depletion | ||
| To_From_GW_Storage | ||
| River_Inflow | ||
| River_Divert | ||
| River_By_Well | ||
| River_Outflow | ||
| Available_Flow | ||
| For ftype = Reservoir | ||
| Initial_Storage | ||
| River_Priority | ||
| River_Storage | ||
| River_Exchange | ||
| Carrier_Priority | ||
| Carrier_Storage | ||
| Total_Supply | ||
| Storage_Use | ||
| Storage_Exchange | ||
| Carrier_Use | ||
| Total_Release | ||
| Evap | ||
| Seep_Spill | ||
| Sim_EOM | ||
| Target_Limit | ||
| Fill_Limit | ||
| River_Inflow | ||
| Total_Release | ||
| Total_Supply | ||
| River_By_Well | ||
| River_Outflow | ||
| For ftype = Well | ||
| Demand | ||
| FromWell | ||
| Short | ||
| ConsumptiveWaterUse | ||
| Return | ||
| Loss | ||
| FromRiver | ||
| FromGWStor | ||
| FromSalvage | ||
| 3 | Format (a12,1x,a24,1x,a3,1x,i5) | |
| 3-1 | idreq | Requested ID |
| Enter ALL, All, all or 0 to get all | ||
| Enter -999 to indicate last ID requested) | ||
| 3-2 | rec24 | Requested structure name |
| 3-3 | idtypx | Requested structure type |
| 3-4 | ix | Print switch |
| 0 do not print | ||
| 1 print |
Repeat for each structure