Skip to content

Reservoir Re Diversion (ityopr=30)

The type 30 operating right allows a reservoir to re-divert water released in the same time step to a T&C plan by another operating rule. This operating rule is similar to a standard reservoir diversion except the amount diverted is limited to the amount released by a prior operating rule (ciopso1).This rule was developed and is commonly used because T&C releases are typically required to benefit other users before the system knows a release was unnecessary. Therefore, when implemented properly, the senior administration number of the T&C release operates and makes water available to other water users. Then the junior reservoir re diversion (type 30) operates to try and re-store this release if water is available (e.g. the release was not required).

Row-data Variable Description
Control Data
1 Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12, 1x,2f8.0, 2i8)
1-1 cidvri(1) Operational right ID
1-2 nameo(1) Operational right name
1-3 rtem(1) Administration number
1-4 dumx Monthly Intervening Structure Switch
+n = Number of intervening structures (max = 10)
12 = Monthly (12) on/off values
-n = Include -12 monthly on/off values minus n intervening structures
Note, when a negative value is provided, it should be -13 or less for 12 monthly values and 1 intervening structure
1-5 ioprsw(1) Annual On/Off Switch
0 = off
1 = on
+n = Begin in year n
-n = Stop after year n
Destination Data
1-6 ciopde Destination reservoir
1-7 iopdes(2,1) Destination account
Supply Data
1-8 ciopso(1) Operating right ID associated with the release of water to a T&C plan
1-9 iopsou(2,1) 0
1-10 ciopso(2) NA
1-11 iopsou(4,1) 0
Type Data
1-12 ityopr(1) 30
Associated Plan Data
1-13 creuse NA
Diversion Type
1-14 cdivtyp NA
Conveyance Loss (%)
1-15 OprLoss 0
Miscellaneous Limits
1-16 OprLimit 0
Start Date
1-17 IoBeg First year of operation
End Date
1-18 IoEnd Last year of operation
Monthly Data
2 Free Format (Include only if the variable (dumx) = 12 or less than -12)
2-1 imonsw(1) Monthly switch 0 = off, 1 = on
+n = Day first used that month
-n = Day last used that month
Note the first entry corresponds to the first month specified in the control file
Intervening Structure Data without loss
3 Format (36x, 10a12) (Include only if the variable (dumx) = 1-10 or < -12)
3-1 intern(1,1) For +dumx, Enter dumx intervening structure IDs
For -dumx, Enter abs(dumx)-12 intervening structure IDs