Skip to content

Import to a Plan (ityopr=35)

The type 35 operating rule provides a method to import water from outside the system to an accounting plan. An import structure should be specified with the same ID in both the diversion station file (*.dds) and plan file (*.pln) using Plan Type 7. The destination accounting plan must be located directly downstream of the import diversion/plan, intervening structures in this rule are not recommended. Monthly import values should be specified as negative demands in the diversion demand file (*.ddm). If the imported supplies are reusable, designate the reuse plan when the imported water is released from the accounting plan.

Row-data Variable Description
Control Data
1 Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12, 1x,2f8.0, 2i8)
1-1 cidvri(1) Operational right ID
1-2 nameo(1) Operation right name
1-3 rtem(1) Administration number
1-4 dumx Monthly Switch
12 = Include monthly on/off values
1-5 ioprsw(1) Annual On/Off Switch
0 = off
1 = on
+n = Begin in year n
-n = Stop after year n
Destination Data
1-6 ciopde Destination accounting plan
1-7 iopdes(2,1) Destination structure account
For a plan destination, enter 1
Supply Data
1-8 ciopso(1) Diversion ID where imported water enters the system
Note import ID in diversion file (*.dds) must match import plan ID in plan file (*.pln)
1-9 iopsou(2,1) 0 (not used)
1-10 ciopso(2) NA
1-11 iopsou(4,1) 0
Type Data
1-12 ityopr(1) 35
Associated Plan Data
1-13 creuse NA
Diversion Type
1-14 cdivtyp NA
Conveyance Loss (%)
1-15 OprLoss 0
Miscellaneous Limits
1-16 OprLimit 0
Start Date
1-17 IoBeg First year of operation
End Date
1-18 IoEnd Last year of operation
Monthly Data
2 Free Format (Include only if the variable (dumx) = 12 or less than -12
2-1 imonsw(1) Monthly switch 0 = off, 1 = on
+n = Day first used that month
-n = Day last used that month
Note the first entry corresponds to the first month specified in the control file