Soil Moisture Use (ityopr=22)
The type 22 operating rule allows the administration date for soil moisture use to be specified for all ditches and wells with one operational
right. This operating rule is commonly applied when soil moisture accounting is included in the analysis (control variable soild = 1). Note this
operating rule expects, and checks, that the control file (*.ctl) variables itsfile, ieffmax and soild are set appropriately. As described in
Section 4.2, the control variable soild allows water deliveries in excess of a diversion's consumptive demand to be stored in the soil moisture
zone. This operating rule allows the administration date to be specified that controls when water stored in the soil moisture zone is used (e.g.
after surface rights, after well right, etc.). Note the soil moisture accounting requires the variable efficiency option be on by setting the annual
time series file control variable (itsfile) equal to 10.
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12,1x, 2f8.0, 2i8) | |
| 1-1 | cidvri(1) | Operational right ID |
| 1-2 | nameo(1) | Operational right name |
| 1-3 | rtem(1) | Administration number |
| 1-4 | dumx | 0 |
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | NA |
| 1-7 | iopdes(2,1) | 0 |
| Source Data | ||
| 1-8 | ciopso(1) | NA |
| 1-9 | iopsou(2,1) | 0 |
| 1-10 | ciopso(2) | NA |
| 1-11 | iopsou(4,1) | 0 |
| Type Data | ||
| 1-12 | ityopr(1) | 22 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | NA |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | 0 |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 |
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if the variable (dumx) = 12 or less than -12) |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n = Day first used that month | ||
| -n = Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file |