Reservoir Release to a Diversion or Reservoir by a carrier (ityopr=3)
The type 3 operating rule provides a method to release water to a reservoir or direct flow structure by a
conduit (e.g. a pipeline or canal that flows directly from a reservoir to a user) rather than the river. In
addition, it can be used to constrain a diversion to the capacity of up to 10 intervening structures or carriers.
Note a diversion is implicitly constrained by the capacity of the destination structure (variable ciopde, row-data 1-6).
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12,1x, 2f8.0, 2i8) | |
| 1-1 | cidvri(1) | Operational right ID |
| 1-2 | nameo(1) | Operational right name |
| 1-3 | rtem(1) | Administration number |
| 1-4 | dumx | Monthly and Structure Switch |
| +n = Number of intervening structures (max = 10) | ||
| -n = Include 12 monthly on/off values minus n intervening structures. Note, when a negative value is provided, it should be -13 or less) | ||
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | Destination diversion ID or destination reservoir ID |
| 1-7 | iopdes(2,1) | Destination structure account |
| For a diversion destination, enter 1 | ||
| For a reservoir destination, enter: | ||
| +n Account to be served by this right | ||
| -n Fill the first n accounts based on the ratio of their ownership | ||
| Supply Data | ||
| 1-8 | ciopso(1) | Supply reservoir ID |
| 1-9 | iopsou(2,1) | Supply reservoir account |
| 1-10 | ciopso(2) | 0 |
| 1-11 | iopsou(4,1) | 0 = provide 100% replacement |
| -1 = provide depletion replacement | ||
| Type Data | ||
| 1-12 | ityopr(1) | 3 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | Diversion |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | 0 |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 |
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if the variable (dumx) = 12 or less than -12) |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n Day first used that month | ||
| -n Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file | ||
| Intervening Structure Data | ||
| 3 | Format (36x, 10a12) (Include only if the variable (dumx) = 1-10 or < -12 1-10 or < -12) |
|
| 3-1 | intern(1,1) | For +dumx, Enter dumx intervening structure ID's |
For -dumx, Enter abs(dumx)-12 intervening structure ID's |