Carrier Right with Reuse (ityopr=31)
The type 31 operating rule provides a method to divert water to a reservoir or direct flow structure using another structure’s water rights. It is similar to the type 11 operating rule except it tracks reusable water associated with the diverted water’s return flows. Water may be diverted to a reservoir or direct flow structure using a carrier structure’s water rights. In addition, it can be used to constrain a diversion to the capacity of up to 10 intervening structures.
Note a diversion is implicitly constrained by the capacity of the destination structure (variable ciopde
1-6). Also, if several operating rules
use the same water right, diversions are not allowed to exceed the decreed capacity. Finally if the destination is a reservoir, the operating rule
demand is the destination reservoir’s capacity. If the destination is a diversion, the demand is the destination structure's demand.
Row-data | Variable | Description |
---|---|---|
Control Data | ||
1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12, 1x,2f8.0, 2i8) | |
1-1 | cidvri | Operational right ID |
1-2 | nameo(1) | Operational right name |
1-3 | rtem(1) | Administration number. Note if ciopso(1) is a diversion right, its administration number is used and rtem is ignored |
1-4 | dumx | Monthly and Structure Switch |
+n = Number of intervening structures (max = 10) | ||
-n = Include -12 for monthly on/off values minus n intervening structures. Note, when a negative value is provided, it should be -13 or less | ||
1-5 | ioprsw(1) | Annual On/Off Switch |
0 = off | ||
1 = on | ||
+n = Begin in year n | ||
-n = Stop after year n | ||
Destination Data | ||
1-6 | ciopde | Destination diversion ID or reservoir ID |
1-7 | iopdes(2,1) | Destination structure account |
For a diversion destination, enter 1 | ||
For a reservoir destination, enter: | ||
+n = Account to be served by this right | ||
-n = Fill the first n accounts based on the ratio of their ownership | ||
Source Data | ||
1-8 | ciopso(1) | Diversion Water right ID |
1-9 | iopsou(2,1) | 0 |
1-10 | ciopso(2) | NA |
1-11 | iopsou(4,1) | 0 |
Type Data | ||
1-12 | ityopr(1) | 31 |
Associated Plan Data | ||
1-13 | creuse | Reuse Plan ID (enter NA if none) |
Diversion Type | ||
1-14 | cdivtyp | NA |
Conveyance Loss (%) | ||
1-15 | OprLoss | 0 |
Miscellaneous Limits | ||
1-16 | OprLimit | 0 |
Start Date | ||
1-17 | IoBeg | First year of operation |
End Date | ||
1-18 | IoEnd | Last year of operation |
Monthly Data | ||
2 | Free Format (Include only if the variable (dumx ) = 12 or less than -12) |
|
2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
+n = Day first used that month | ||
-n = Day last used that month | ||
Note the first entry corresponds to the first month specified in the control file | ||
Intervening Structure Data without loss | ||
3 | Format (36x, 10a12) (Include only if the variable (dumx ) = 1-10 or < -12) |
|
3-1 | intern(1,1) | For +dumx , Enter dumx intervening structure ID's |
For -dumx , Enter abs(dumx )-12 intervening structure ID's |