Augmentation Well Direct (ityopr=37)
The type 37 operating rule provides a method to pump an Augmentation well in order to satisfy a T&C or Augmentation Plan demand. The source is a well water right. The destination is a T&C or Well Augmentation Plan. The following comments are provided to assist in using and interpreting this rule:
- An augmentation well right is typically tied to a unique (augmentation) well structure. This allows unique return and depletion data associated with the augmentation well to be provided in the well station file (*.wes). Note that return flows associated with an augmentation are typically assigned a unit response function that routes water to the stream in the same time step that they occur.
- This rule requires source 2 (
ciopso(2)) be an “Augmentation plan ID”. This allows the augmentation plan requirements associated with the augmentation well to be stored and ultimately satisfied. This plan ID may or may not be the same as the destination plan ID. - An augmentation well might serve as both a water supply and an augmentation source. This can occur when the same right is assigned to both a standard (irrigation) well structure and an Augmentation well structure. If the administration number assigned in the operational right file is different than the administration number of the source (augmentation) well the operating rule value is used and a warning is printed to the log file. The amount pumped to each demand is limited by the well’s total capacity and water right.
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12, 1x,2f8.0, 2i8) | |
| 1-1 | cidvri(1) | Operational right ID |
| 1-2 | nameo(1) | Operation right name |
| 1-3 | rtem(1) | Administration number |
| 1-4 | dumx | Monthly On/Off Switch |
| 0 = Include no monthly on/off values | ||
| 12 = Include 12 monthly on/off values | ||
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | T&C or Well Augmentation Plan ID |
| 1-7 | iopdes(2,1) | 0 (not used) |
| Supply Data | ||
| 1-8 | ciopso(1) | Well Water Right ID |
| 1-9 | iopsou(2,1) | 0 (not used) |
| 1-10 | ciopso(2) | Plan ID used to track the Augmentation requirement of the Augmentation Well pumping |
| 1-11 | iopsou(4,1) | 0 |
| Type Data | ||
| 1-12 | ityopr(1) | 37 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | NA |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | 0 |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 |
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if the variable (dumx) = 12 or less than -12) |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n = Day first used that month | ||
| -n = Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file | ||
| Intervening Structure Data without loss | ||
| 3 | Format (36x, 10a12) (Include only if the variable (dumx) = 1-10 or < -12) |
|
| 3-1 | intern(1,1) | For +dumx, Enter dumx intervening structure ID's |
For -dumx, Enter abs(dumx)-12 intervening structure ID's |