Accounting Plan Limit (ityopr=47)
The type 47 operating rule provides a method to impose monthly and annual limits for one or more operating rules. It is typically used when the source of the water supply is a “standard” storage right. For example if water is stored in a reservoir under a “standard” storage right, releases to selected users might be limited to the monthly and annual limits imposed by this rule. This rule has generic application but was developed for the Colorado River Basin where replacement reservoir releases from Green Mountain Reservoir, Williams Fork Reservoir and Wolford Mountain Reservoir are limited to 66,000 af/yr. The Accounting Plan assigned as the source in this rule is typically tied to a Replacement Reservoir Release (type 10) or a Direct Flow Release with a Plan (type 27). The following are noted:
- The operating rule’s source is an accounting plan that requires a monthly or annual limit. It can be located anywhere in the network.
- The operating rule’s destination is null (i.e. the rule simply imposes monthly or annual limits on any water user tied to this plan).
- The administration number specified for this plan is not used by StateMod (i.e. it is simply a place holder).
- The annual limits are reset at the month that corresponds to the source variable
iopsou(2,k). For example 1 = January, 2 = February, etc.) - Monthly and annual data is required for this operating rule.
| Row-data | Variable | Description |
|---|---|---|
| Control Data | ||
| 1 | Format (a12, a24, 12x, 4x, f12.5, f8.0, i8, 3(1x,a12,i8), i8, 1x,a12, 1x,a12,1x, 2f8.0, 2i8) | |
| 1-1 | cidvri | Operational right ID |
| 1-2 | nameo(1) | Operational right name |
| 1-3 | rtem(1) | Administration number |
| 1-4 | dumx | Monthly and Structure Switch |
| +n = Number of intervening structures (max = 10) | ||
| -n = Include -12 for monthly on/off values minus n intervening structures. Note, when a negative value is provided, it should be -13 or less | ||
| 1-5 | ioprsw(1) | Annual On/Off Switch |
| 0 = off | ||
| 1 = on | ||
| +n = Begin in year n | ||
| -n = Stop after year n | ||
| Destination Data | ||
| 1-6 | ciopde | NA |
| 1-7 | iopdes(2,1) | NA |
| Source Data | ||
| 1-8 | ciopso(1) | Accounting Plan ID |
| 1-9 | iopsou(2,1) | Month when the operational limits are reset (e.g. 1 = January, 2 = February, etc). |
| 1-10 | ciopso(2) | NA |
| 1-11 | iopsou(4,1) | NA |
| Type Data | ||
| 1-12 | ityopr(1) | 47 |
| Associated Plan Data | ||
| 1-13 | creuse | NA |
| Diversion Type | ||
| 1-14 | cdivtyp | Diversion |
| Conveyance Loss (%) | ||
| 1-15 | OprLoss | NA |
| Miscellaneous Limits | ||
| 1-16 | OprLimit | 0 = Do not include monthly or annual operational limits |
| 1 = Monthly and Annual diversion limits are provided (see row 3) | ||
| Start Date | ||
| 1-17 | IoBeg | First year of operation |
| End Date | ||
| 1-18 | IoEnd | Last year of operation |
| Monthly Data | ||
| 2 | Free Format (Include only if OprLoss = 0 and the variable (dumx) = 12 or less than -12 |
|
| 2-1 | imonsw(1) | Monthly switch 0 = off, 1 = on |
| +n = Day first used that month | ||
| -n = Day last used that month | ||
| Note the first entry corresponds to the first month specified in the control file | ||
| Operating Limits (Monthly and Annual) | ||
Include if OprLimit = 1 |
||
| 3-1 | OprMax(1,1-12) | Monthly exchange limit (af/mo) |
| 3-13 | OprMax(1,13) | Annual exchange limit (af/yr) |